ANVIL Metal Pipe Straight: Union, 300 psi @ 150° F, 2 in x 2 in, Malleable Iron
The ANVIL Metal Pipe Straight: Union is a medium-pressure threaded pipe fitting, model 25CH01 (MPN 0313822181). It is a 2 in x 2 in union made of malleable iron, rated for a maximum operating pressure of 300 psi @…
SKU 3G-OTH-462161
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Straight: Union is a medium-pressure threaded pipe fitting, model 25CH01 (MPN 0313822181). It is a 2 in x 2 in union made of malleable iron, rated for a maximum operating pressure of 300 psi @ 150° F, and manufactured in the USA.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Straight Union used for?
The ANVIL Metal Pipe Straight Union connects two pipes of the same diameter in a straight run, allowing easy disassembly for maintenance or repair. It is commonly used in medium-pressure plumbing, steam, and industrial piping systems where reliable sealing and durability are required.
What are the specifications of the ANVIL 2 in union?
The ANVIL union (MPN 0313822181) is a 2 in x 2 in straight union made of malleable iron. It has a maximum operating pressure of 300 psi at 150 °F. This medium-pressure threaded pipe fitting is manufactured in the USA and is suitable for industrial piping applications.
Where to buy ANVIL pipe unions worldwide?
3G Electric supplies ANVIL pipe unions worldwide, handling full logistics and customs clearance for global delivery. As a sourcing partner, we provide genuine ANVIL fittings like the 2 in malleable iron union (MPN 0313822181) to industrial customers across multiple sectors.
How to install an ANVIL malleable iron union?
To install an ANVIL union, apply pipe thread sealant to the male threads, hand-tighten the union nut, then use wrenches on the hex ends to snug the connection without over-tightening. Ensure the gasket is seated properly to achieve a leak-free seal at the rated 300 psi.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
