ANVIL Metal Pipe Tee: Tee (run x run x branch), 300 psi @ 150°F
The ANVIL Metal Pipe Tee is a medium-pressure threaded pipe fitting (run x run x branch) rated at 300 psi @ 150°F, with a 1 1/4 in x 1 1/4 in x 1/2 in configuration (MPN 0311042808). 3G Electric interprets customer…
SKU 3G-OTH-462615
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Tee is a medium-pressure threaded pipe fitting (run x run x branch) rated at 300 psi @ 150°F, with a 1 1/4 in x 1 1/4 in x 1/2 in configuration (MPN 0311042808). 3G Electric interprets customer demand and delivers this genuine industrial fitting across 14 departments — and far more — with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Tee used for?
The ANVIL Metal Pipe Tee is a medium-pressure threaded pipe fitting used to split or combine flow in industrial piping systems. It is rated at 300 psi @ 150°F and is commonly applied in plumbing, HVAC, and process lines where a 1 1/4 in x 1 1/4 in x 1/2 in branch connection is needed.
What are the specifications of the ANVIL Metal Pipe Tee?
The ANVIL Metal Pipe Tee (MPN 0311042808) is a tee configuration (run x run x branch) with a maximum operating pressure of 300 psi @ 150°F. It has a 1 1/4 in x 1 1/4 in x 1/2 in size and is a medium-pressure threaded pipe fitting suitable for industrial applications.
Where to buy the ANVIL Metal Pipe Tee worldwide?
3G Electric supplies the ANVIL Metal Pipe Tee (MPN 0311042808) to customers worldwide. We handle full logistics, customs clearance, and delivery for this genuine industrial fitting. Contact us to order this medium-pressure threaded pipe tee for your project.
How to install the ANVIL Metal Pipe Tee?
Install the ANVIL Metal Pipe Tee by applying thread sealant to male NPT threads and hand-tightening, then using wrenches on the pipe and fitting hexes to achieve a leak-free joint. Avoid over-tightening to prevent stress on the 300 psi @ 150°F rated tee. Always follow local piping codes.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
