ANVIL Metal Pipe Tee: Tee (run x run x branch), 300 psi @ 150°F, 3 in x 3 in x 1 in
The ANVIL Metal Pipe Tee is a medium-pressure threaded pipe fitting (run x run x branch) with a 3 in x 3 in x 1 in configuration, made of malleable iron. It has a maximum operating pressure of 300 psi @ 150°F (MPN…
SKU 3G-OTH-462371
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Tee is a medium-pressure threaded pipe fitting (run x run x branch) with a 3 in x 3 in x 1 in configuration, made of malleable iron. It has a maximum operating pressure of 300 psi @ 150°F (MPN 0311055206).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is an ANVIL Metal Pipe Tee used for?
This malleable iron tee (run x run x branch) is used in medium-pressure piping systems to split or combine flow at a 3 in x 3 in x 1 in junction. It is rated for 300 psi at 150°F, making it suitable for industrial plumbing, HVAC, and process lines where threaded connections are required.
What are the specifications of the ANVIL 3 in x 3 in x 1 in pipe tee?
The ANVIL Metal Pipe Tee (MPN 0311055206) is a threaded tee with a 3 in x 3 in x 1 in run x run x branch configuration. It is made of malleable iron and has a maximum operating pressure of 300 psi at 150°F. It is a medium-pressure fitting for industrial piping systems.
Where to buy ANVIL pipe fittings worldwide?
3G Electric supplies ANVIL pipe fittings worldwide, handling full logistics and customs clearance for global delivery. As a sourcing partner, we provide genuine ANVIL malleable iron tees and other threaded fittings to industrial buyers. Contact us for availability and lead time to your location.
How to install an ANVIL threaded pipe tee?
Apply pipe thread sealant to male threads, hand-tighten the tee onto the run pipe, then use wrenches on the tee flats to achieve a leak-free joint without over-tightening. Ensure the branch port aligns with the branch pipe. For 300 psi systems, verify thread engagement meets ANSI standards.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
