ANVIL Cap: 3/8 in, NPT Threaded, 2,000 psi @ 150° F, Steel, Class 3000
The ANVIL Cap is a 3/8 in NPT threaded steel pipe fitting, Class 3000, rated for a maximum operating pressure of 2,000 psi @ 150° F. As a threaded high-pressure pipe fitting, it is designed for use in industrial…
SKU 3G-OTH-466580
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is a 3/8 in NPT threaded steel pipe fitting, Class 3000, rated for a maximum operating pressure of 2,000 psi @ 150° F. As a threaded high-pressure pipe fitting, it is designed for use in industrial piping systems requiring a durable, high-pressure cap.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL 3/8 in NPT threaded cap used for?
The ANVIL cap seals the end of a 3/8 in NPT threaded pipe in high-pressure industrial piping systems. It is rated for 2,000 psi at 150 °F and is commonly used in steam, water, oil, and gas applications where a durable, leak-proof closure is required.
What are the specifications of the ANVIL cap 0361188402?
The ANVIL cap (MPN 0361188402) is a 3/8 in NPT threaded steel fitting, Class 3000. Its maximum operating pressure is 2,000 psi at 150 °F. It is designed for high-pressure piping systems and is made from steel for strength and corrosion resistance.
Where to buy the ANVIL 3/8 in NPT cap worldwide?
3G Electric supplies the ANVIL 3/8 in NPT threaded cap to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Class 3000 steel pipe fitting.
How to install an ANVIL threaded pipe cap?
Apply pipe thread sealant or PTFE tape to the male threads of the pipe. Hand-tighten the ANVIL cap onto the pipe, then use a wrench for an additional 1–2 turns to achieve a leak-proof seal. Do not overtighten, as this may damage the threads or fitting.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
