ANVIL Cap: 1 1/4 in, NPT Threaded, 2,000 psi @ 150° F, Steel, Class 3000
The ANVIL Cap is a threaded high-pressure pipe fitting with a 1 1/4 in NPT connection, rated for a maximum operating pressure of 2,000 psi at 150° F. Constructed from steel and classified as Class 3000, this cap is…
SKU 3G-OTH-467097
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is a threaded high-pressure pipe fitting with a 1 1/4 in NPT connection, rated for a maximum operating pressure of 2,000 psi at 150° F. Constructed from steel and classified as Class 3000, this cap is designed for reliable sealing in industrial piping systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL 1 1/4 in NPT threaded cap used for?
The ANVIL cap seals the end of a threaded pipe in high-pressure industrial piping systems. It is commonly used in steam, water, oil, and gas applications where a reliable, leak-proof closure is required at pressures up to 2,000 psi at 150° F.
What are the specifications of the ANVIL cap 0361189202?
This ANVIL cap has a 1 1/4 in NPT thread, is made of steel, and is rated Class 3000. Its maximum operating pressure is 2,000 psi at 150° F. The manufacturer part number is 0361189202. It is designed for durable sealing in demanding piping environments.
Where to buy the ANVIL 1 1/4 in NPT cap worldwide?
3G Electric supplies the ANVIL 1 1/4 in NPT threaded cap to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Class 3000 steel pipe fitting.
How to install an ANVIL threaded pipe cap?
Apply a compatible thread sealant or PTFE tape to the male pipe threads. Hand-tighten the ANVIL cap onto the pipe, then use a wrench for an additional 1/4 to 1/2 turn. Do not overtighten. Verify the joint is leak-free before pressurizing the system.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
