ANVIL Plug: 3/8 in, NPT Threaded, 2,000 psi @ 150° F, Steel
The ANVIL Plug is a 3/8 in NPT threaded steel pipe fitting rated for a maximum operating pressure of 2,000 psi at 150° F. As a threaded high-pressure pipe fitting, it is designed to seal and close off pipe ends in…
SKU 3G-OTH-466772
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Plug is a 3/8 in NPT threaded steel pipe fitting rated for a maximum operating pressure of 2,000 psi at 150° F. As a threaded high-pressure pipe fitting, it is designed to seal and close off pipe ends in industrial systems. 3G Electric sources this genuine ANVIL component (MPN 0361325004) across 14 industrial departments, with specialist depth in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Plug 0361325004 used for?
The ANVIL Plug (MPN 0361325004) is a 3/8 in NPT threaded steel pipe fitting rated for 2,000 psi at 150° F. It seals and closes off pipe ends in high-pressure industrial systems, including applications in combustion, pumps, and controls across 14 departments.
What are the specifications of the ANVIL Plug 0361325004?
The ANVIL Plug is a 3/8 in NPT threaded steel fitting with a maximum operating pressure of 2,000 psi at 150° F. It is a genuine ANVIL component (MPN 0361325004) designed for high-pressure pipe sealing in industrial environments.
Where to buy the ANVIL Plug 0361325004 worldwide?
3G Electric supplies the genuine ANVIL Plug (MPN 0361325004) worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this 3/8 in NPT threaded steel fitting rated for 2,000 psi at 150° F to your facility.
How to install the ANVIL Plug 0361325004?
Install the ANVIL Plug by applying thread sealant to the NPT threads and hand-tightening into the pipe end. Use a wrench for final snug fit, avoiding over-torque to prevent damage. Ensure system pressure is below 2,000 psi at 150° F before operation.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
