ANVIL Plug: 3/4 in, NPT Threaded, 2,000 psi @ 150° F, Steel
The ANVIL Plug is a 3/4 in NPT threaded high-pressure pipe fitting made of steel, rated for a maximum operating pressure of 2,000 psi at 150° F (MPN 0361325400). 3G Electric sources this genuine industrial component…
SKU 3G-OTH-466586
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Plug is a 3/4 in NPT threaded high-pressure pipe fitting made of steel, rated for a maximum operating pressure of 2,000 psi at 150° F (MPN 0361325400). 3G Electric sources this genuine industrial component globally, backed by our specialist expertise in combustion, pumps, and controls across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL 3/4 in NPT threaded plug used for?
The ANVIL plug seals open ends in high-pressure piping systems, typically in industrial applications like steam, water, or oil lines. It is a steel NPT threaded fitting rated for 2,000 psi at 150° F, ensuring a leak-tight closure in demanding environments.
What are the specifications of the ANVIL plug MPN 0361325400?
The ANVIL plug (MPN 0361325400) is a 3/4 in NPT threaded steel fitting with a maximum operating pressure of 2,000 psi at 150° F. It is designed for high-pressure pipe systems and is sourced globally by 3G Electric, which supplies genuine industrial components across 14 departments.
Where to buy the ANVIL 3/4 in NPT threaded plug worldwide?
3G Electric supplies the ANVIL 3/4 in NPT threaded plug (MPN 0361325400) worldwide, handling full logistics and customs clearance. As a global industrial solutions provider with specialist expertise in combustion, pumps, and controls, we deliver this genuine steel fitting to your location.
How to install an ANVIL NPT threaded plug correctly?
Apply a compatible thread sealant or PTFE tape to the male NPT threads, then hand-tighten the plug into the female fitting. Use a wrench for final snugging—avoid overtightening to prevent thread damage. Always verify pressure rating (2,000 psi @ 150° F) matches system requirements.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
