ANVIL Metal Pipe Straight: 1/8 in x 1/8 in, Female NPT Threaded x Female NPT Threaded
The ANVIL Metal Pipe Straight (1/8 in x 1/8 in) is a threaded high-pressure pipe fitting — a steel union with Female NPT Threaded x Female NPT Threaded connections (MPN 0361500200). It is rated for a maximum…
SKU 3G-OTH-466783
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Straight (1/8 in x 1/8 in) is a threaded high-pressure pipe fitting — a steel union with Female NPT Threaded x Female NPT Threaded connections (MPN 0361500200). It is rated for a maximum operating pressure of 2,000 psi @ 150° F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL 1/8 in steel pipe union used for?
The ANVIL 1/8 in steel pipe union connects two female NPT threaded pipes in high-pressure systems up to 2,000 psi at 150° F. It is commonly used in industrial plumbing, steam, and hydraulic lines where a reliable, leak-proof joint is needed for maintenance or repair.
What are the specifications of the ANVIL 0361500200 pipe union?
The ANVIL 0361500200 is a 1/8 in x 1/8 in steel union with female NPT threaded x female NPT threaded connections. It has a maximum operating pressure of 2,000 psi at 150° F. The part is made of steel and is designed for high-pressure pipe fitting applications.
Where to buy the ANVIL 0361500200 pipe union worldwide?
3G Electric supplies the ANVIL 0361500200 steel pipe union to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this threaded high-pressure fitting.
How to install an ANVIL steel pipe union?
To install an ANVIL steel pipe union, ensure both pipe ends are clean and threaded. Apply thread sealant to the male NPT threads, then hand-tighten the union nuts. Use wrenches on the hex flats to final-tighten, avoiding over-torque. Always verify pressure rating (2,000 psi max at 150° F) before use.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
