ANVIL Metal Pipe Flange: 1 1/4 in, Female NPT Threaded, Cast Iron, Flat Flange
The ANVIL Metal Pipe Flange (SKU 4KWH9) is a 1 1/4 in Female NPT Threaded, Cast Iron, Flat Flange, Class 125, with a maximum operating pressure of 175 psi. 3G Electric sources this genuine ANVIL component (MPN…
SKU 3G-OTH-485742
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Flange (SKU 4KWH9) is a 1 1/4 in Female NPT Threaded, Cast Iron, Flat Flange, Class 125, with a maximum operating pressure of 175 psi. 3G Electric sources this genuine ANVIL component (MPN 0308006600) as part of our broader industrial supply capability across 14 departments, with specialist expertise in combustion, pumps, and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Metal Pipe Flange used for?
The ANVIL Metal Pipe Flange connects 1 1/4 in female NPT threaded pipes in industrial plumbing, HVAC, and process systems. Its cast iron construction and Class 125 rating suit low-pressure water, steam, and gas applications up to 175 psi.
What are the specifications of the ANVIL Metal Pipe Flange 0308006600?
This ANVIL flange (MPN 0308006600) is a 1 1/4 in female NPT threaded, cast iron, flat flange rated Class 125. Maximum operating pressure is 175 psi. It is a genuine ANVIL component sourced by 3G Electric.
Where to buy the ANVIL Metal Pipe Flange worldwide?
3G Electric supplies the genuine ANVIL Metal Pipe Flange (MPN 0308006600) worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this Class 125 cast iron flange.
How to install the ANVIL cast iron threaded flange?
Apply pipe thread sealant to the male NPT pipe end, hand-tighten the ANVIL flange, then wrench-tighten to 1-2 turns past hand-tight. Avoid over-torquing cast iron. Use a gasket on the flat face for bolted connections. Verify pressure rating does not exceed 175 psi.
ANVIL Produk
3G Electric memasok ANVIL threaded steel & iron pipe flanges. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
