ANVIL Metal Pipe Tee: 2 1/2 in x 2 1/2 in x 2 1/2 in, Steel, Class 6000
The ANVIL Metal Pipe Tee (SKU 60XV49) is a threaded high-pressure pipe fitting, configured as a 2 1/2 in x 2 1/2 in x 2 1/2 in Tee (Run x Run x Branch). It is constructed from steel and rated Class 6000, with…
SKU 3G-OTH-466618
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Metal Pipe Tee (SKU 60XV49) is a threaded high-pressure pipe fitting, configured as a 2 1/2 in x 2 1/2 in x 2 1/2 in Tee (Run x Run x Branch). It is constructed from steel and rated Class 6000, with manufacturer part number 0361226004. 3G Electric interprets customer demand and delivers this genuine industrial fitting across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is an ANVIL Metal Pipe Tee used for?
The ANVIL Metal Pipe Tee connects three pipe runs in a high-pressure system, splitting or combining flow through its run and branch ports. It is used in industrial applications such as steam, water, oil, and gas lines where Class 6000 steel fittings are required for durability and leak resistance.
What are the specifications of the ANVIL Metal Pipe Tee 0361226004?
This ANVIL pipe tee is a 2 1/2 in x 2 1/2 in x 2 1/2 in threaded fitting, configured as a Tee (Run x Run x Branch). It is made of steel, rated Class 6000, and carries manufacturer part number 0361226004. 3G Electric supplies this genuine fitting for high-pressure piping systems.
Where to buy ANVIL pipe fittings in worldwide?
3G Electric supplies the ANVIL Metal Pipe Tee to customers worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver genuine ANVIL fittings like this Class 6000 steel tee to support your high-pressure piping needs anywhere.
How to install a threaded steel pipe tee?
Apply pipe thread sealant to male threads, then hand-tighten the tee onto each pipe end. Use wrenches on the tee's hex flats to achieve a snug fit without over-torquing, which can crack the fitting. Always follow manufacturer guidelines for pressure ratings and thread engagement to ensure a leak-free joint.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
