ANVIL Cap: 1/2 in, NPT Threaded, 9,000 psi, Steel, 1 5/16 in Lg
The ANVIL Threaded High-Pressure Pipe Fitting is a 1/2 in NPT threaded steel cap rated for 9,000 psi maximum operating pressure, with a 1 5/16 in length. 3G Electric interprets demand for this fitting across 14…
SKU 3G-OTH-466542
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Threaded High-Pressure Pipe Fitting is a 1/2 in NPT threaded steel cap rated for 9,000 psi maximum operating pressure, with a 1 5/16 in length. 3G Electric interprets demand for this fitting across 14 industrial departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as a trust anchor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL 1/2 in NPT threaded steel cap used for?
This ANVIL cap seals the end of a 1/2 in NPT threaded pipe in high-pressure systems up to 9,000 psi. It is commonly used in hydraulic, pneumatic, and industrial fluid-handling applications where a reliable, leak-proof closure is required.
What are the specifications of the ANVIL cap 0361290307?
The ANVIL cap (MPN 0361290307) has a 1/2 in NPT threaded connection, a maximum operating pressure of 9,000 psi, and is made of steel. Its overall length is 1 5/16 in. It is a threaded high-pressure pipe fitting designed for industrial use.
Where to buy the ANVIL 9,000 psi pipe cap worldwide?
3G Electric supplies the ANVIL 9,000 psi threaded steel cap to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to order this fitting for your high-pressure piping system.
How to install an ANVIL threaded high-pressure pipe cap?
Apply a compatible thread sealant or PTFE tape to the male NPT threads. Hand-tighten the cap onto the pipe, then use a wrench for an additional 1-2 turns to achieve a leak-free seal. Do not overtighten, as steel NPT fittings can crack under excessive torque.
ANVIL Produk
3G Electric memasok ANVIL threaded high-pressure pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
