ANVIL Plug: Plug, 285 psi, 3/4 in, NPT Threaded, Steel
The ANVIL Plug is a medium-pressure threaded pipe fitting, a 3/4 in NPT threaded steel plug rated to 285 psi maximum operating pressure (MPN 0361307978). 3G Electric interprets this demand and delivers it across 14…
SKU 3G-OTH-462545
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Plug is a medium-pressure threaded pipe fitting, a 3/4 in NPT threaded steel plug rated to 285 psi maximum operating pressure (MPN 0361307978). 3G Electric interprets this demand and delivers it across 14 industrial departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as a trust anchor, not a limit.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Plug used for?
The ANVIL Plug is a medium-pressure threaded pipe fitting used to seal the end of a 3/4 in NPT pipe system. It is rated for 285 psi maximum operating pressure and is commonly applied in industrial plumbing, pneumatic, and hydraulic circuits where a reliable steel closure is required.
What are the specifications of the ANVIL Plug?
The ANVIL Plug (MPN 0361307978) is a 3/4 in NPT threaded steel plug with a maximum operating pressure of 285 psi. It is a medium-pressure pipe fitting suitable for industrial applications. 3G Electric supplies this globally sourced component across 14 industrial departments.
Where to buy the ANVIL Plug worldwide?
3G Electric supplies the ANVIL Plug (MPN 0361307978) worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this 3/4 in NPT steel plug rated to 285 psi to your facility. Contact us for availability and lead time.
How to install the ANVIL Plug?
Install the ANVIL Plug by applying thread sealant to the NPT threads and hand-tightening into the female pipe fitting. Use a wrench for final snugging, but avoid overtightening to prevent thread damage. Ensure the system is depressurized before installation. This steel plug is rated to 285 psi.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
