ANVIL Plug: Plug, 285 psi, 2 in, NPT Threaded, Steel
The ANVIL Plug is a medium-pressure threaded pipe fitting, a 2-inch NPT threaded steel plug rated for a maximum operating pressure of 285 psi (MPN 0361308133). 3G Electric sources this globally sourced component as…
SKU 3G-OTH-462171
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Plug is a medium-pressure threaded pipe fitting, a 2-inch NPT threaded steel plug rated for a maximum operating pressure of 285 psi (MPN 0361308133). 3G Electric sources this globally sourced component as part of our broad industrial supply across 14 departments, with specialist depth in combustion, pumps, and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Plug used for?
The ANVIL Plug is a medium-pressure threaded pipe fitting used to seal the end of a 2-inch NPT threaded pipe in industrial systems. It is rated for up to 285 psi and is commonly applied in steam, water, and gas lines across machining, HVAC, and power transmission setups.
What are the specifications of the ANVIL Plug?
The ANVIL Plug (MPN 0361308133) is a 2-inch NPT threaded steel plug with a maximum operating pressure of 285 psi. It is a globally sourced component designed for medium-pressure pipe fitting applications. 3G Electric supplies this fitting across 14 industrial departments.
Where to buy the ANVIL Plug worldwide?
3G Electric supplies the ANVIL Plug (MPN 0361308133) worldwide, handling full logistics and customs clearance for global delivery. As a broad-line industrial distributor, we source this globally sourced steel plug and support procurement across 14 departments, including combustion and pumps.
How to install the ANVIL Plug?
To install the ANVIL Plug, apply pipe thread sealant to the NPT threads and hand-tighten into the female fitting. Use a wrench for final snugging without over-torquing to avoid thread damage. Ensure the system is depressurized before installation. 3G Electric provides sourcing support for this fitting.
ANVIL Produk
3G Electric memasok ANVIL medium-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
