ANVIL Cap: Cap, Steel, Class 3000, 9,000 psi, 3/4 in
The ANVIL Cap is an extreme-pressure zinc-galvanized steel pipe fitting, Class 3000, rated for 9,000 psi, with a 3/4 in NPT threaded connection (MPN 0361502842). It does not include pre-applied thread sealant.
SKU 3G-OTH-459210
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is an extreme-pressure zinc-galvanized steel pipe fitting, Class 3000, rated for 9,000 psi, with a 3/4 in NPT threaded connection (MPN 0361502842). It does not include pre-applied thread sealant.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Cap used for?
The ANVIL Cap is an extreme-pressure zinc-galvanized steel pipe fitting used to seal the end of a 3/4 in NPT threaded pipe in high-pressure industrial systems up to 9,000 psi. It is commonly applied in hydraulic, pneumatic, and process piping across machining, power transmission, and material handling departments.
What are the specifications of the ANVIL Cap?
The ANVIL Cap is a Class 3000 steel fitting rated for 9,000 psi, with a 3/4 in NPT threaded connection (MPN 0361502842). It is zinc-galvanized for corrosion resistance and does not include pre-applied thread sealant. This cap is designed for extreme-pressure applications in industrial piping systems.
Where to buy the ANVIL Cap worldwide?
3G Electric supplies the ANVIL Cap (MPN 0361502842) worldwide, handling full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine ANVIL fittings across 14 departments, including combustion, pumps, and controls, ensuring you get the right part for extreme-pressure applications.
How to install the ANVIL Cap?
To install the ANVIL Cap, apply a compatible thread sealant or PTFE tape to the 3/4 in NPT male threads, then hand-tighten the cap onto the pipe. Use a wrench for final snugging, avoiding over-torque to prevent thread damage. Always follow standard piping practices for Class 3000 fittings rated at 9,000 psi.
ANVIL Produk
3G Electric memasok ANVIL extreme-pressure zinc-galvanized steel pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
