ANVIL Cap: Cap, Steel, Class 3000, 9,000 psi, 1 1/2 in
The ANVIL Cap is an extreme-pressure zinc-galvanized steel pipe fitting, Class 3000, rated to 9,000 psi, with a 1 1/2 in NPT threaded connection. This cap does not include pre-applied thread sealant. 3G Electric…
SKU 3G-OTH-459214
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The ANVIL Cap is an extreme-pressure zinc-galvanized steel pipe fitting, Class 3000, rated to 9,000 psi, with a 1 1/2 in NPT threaded connection. This cap does not include pre-applied thread sealant. 3G Electric interprets your demand for this OEM-specified component, sources it, and supports your procurement across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the ANVIL Cap used for?
The ANVIL Cap seals the end of a 1 1/2 in NPT threaded pipe in extreme-pressure systems rated to 9,000 psi. It is commonly used in industrial piping for oil and gas, chemical processing, and hydraulic applications where a Class 3000 zinc-galvanized steel fitting is required.
What are the specifications of the ANVIL Cap 0366190403?
The ANVIL Cap is a Class 3000 zinc-galvanized steel pipe fitting with a 1 1/2 in NPT threaded connection, rated to 9,000 psi. It does not include pre-applied thread sealant. The manufacturer part number is 0366190403.
Where to buy the ANVIL Cap in worldwide?
3G Electric supplies the ANVIL Cap 0366190403 to worldwide locations. We handle full logistics, customs clearance, and delivery for this extreme-pressure zinc-galvanized steel pipe fitting, ensuring your procurement is supported across 14 industrial departments.
How to install the ANVIL Cap on a threaded pipe?
Apply a compatible thread sealant or PTFE tape to the male NPT threads before threading the ANVIL Cap onto the pipe. Tighten to the recommended torque for Class 3000 fittings. Do not overtighten. Verify the seal holds at the rated 9,000 psi before pressurizing the system.
ANVIL Produk
3G Electric memasok ANVIL extreme-pressure zinc-galvanized steel pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
