APOLLO Ball Valve: 1/2 in, Bronze, 300 psig Max. Pressure (CWP), Full Port, Two-Piece
The APOLLO Ball Valve (1/2 in, MPN 77W10311HCA) is a bronze, full-port, two-piece tee valve rated for 300 psig max. pressure (CWP). It includes a dust cap and chain for operational protection. 3G Electric interprets…
SKU 3G-OTH-595474
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APOLLO Ball Valve (1/2 in, MPN 77W10311HCA) is a bronze, full-port, two-piece tee valve rated for 300 psig max. pressure (CWP). It includes a dust cap and chain for operational protection. 3G Electric interprets demand and delivers this valve alongside genuine industrial equipment across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APOLLO 77W10311HCA ball valve used for?
The APOLLO 77W10311HCA is a bronze, full-port, two-piece tee ball valve rated for 300 psig CWP. It is used in industrial piping systems for on/off flow control of water, oil, and gas, with a dust cap and chain for protection in harsh environments.
What are the specifications of the APOLLO 77W10311HCA ball valve?
The APOLLO 77W10311HCA is a 1/2 in bronze ball valve with full-port, two-piece tee design. Maximum pressure rating is 300 psig CWP. It includes a dust cap and chain. The manufacturer part number is 77W10311HCA.
Where to buy the APOLLO 77W10311HCA ball valve worldwide?
3G Electric supplies the APOLLO 77W10311HCA ball valve worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine APOLLO valves and support across 14 departments.
How to install the APOLLO 77W10311HCA ball valve?
Install the APOLLO 77W10311HCA by ensuring the pipe ends are clean and threaded properly. Apply thread sealant to male threads, hand-tighten the valve, then use wrenches on the valve body (not the handle) to finalise. Do not overtighten. Test at operating pressure.
Digunakan dalam
Aplikasi umum untuk APOLLOAPOLLO Produk
3G Electric memasok APOLLO bronze ball valves with dust cap & chain. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









