APPLETON ELECTRIC Reducing Bushing - Haz Loc: Iron
The APPLETON ELECTRIC Reducing Bushing (MPN RB250-100) is a hazardous location reducing bushing made of iron. It reduces a trade size from 2-1/2 inches to 1 inch.
SKU 3G-OTH-05866
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPLETON ELECTRIC Reducing Bushing (MPN RB250-100) is a hazardous location reducing bushing made of iron. It reduces a trade size from 2-1/2 inches to 1 inch.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPLETON ELECTRIC Reducing Bushing RB250-100 used for?
The APPLETON ELECTRIC Reducing Bushing RB250-100 is used in hazardous locations to reduce a conduit or cable fitting trade size from 2-1/2 inches down to 1 inch. It is made of iron for durability and is commonly applied in industrial environments where explosion-proof or flameproof installations are required.
What are the specifications of the APPLETON ELECTRIC Reducing Bushing RB250-100?
The APPLETON ELECTRIC Reducing Bushing RB250-100 is a hazardous location reducing bushing made of iron. Its reduction size is 2-1/2 inches to 1 inch trade size. The manufacturer part number is RB250-100. It is designed for use in demanding industrial and hazardous environments.
Where to buy the APPLETON ELECTRIC Reducing Bushing RB250-100 worldwide?
You can source the APPLETON ELECTRIC Reducing Bushing RB250-100 worldwide through 3G Electric. As a global industrial equipment distributor, 3G Electric handles full logistics, customs clearance, and delivery to your location. Contact 3G Electric for availability and lead time.
How to install the APPLETON ELECTRIC Reducing Bushing RB250-100?
To install the APPLETON ELECTRIC Reducing Bushing RB250-100, first ensure the conduit or fitting is clean and dry. Thread the bushing into the larger opening (2-1/2 inches) until hand-tight, then use a wrench for final tightening. Always follow applicable hazardous location installation codes and use approved sealing compounds if required.
Digunakan dalam
Aplikasi umum untuk APPLETON ELECTRICAPPLETON ELECTRIC Produk
3G Electric memasok APPLETON ELECTRIC hazardous location reducing bushings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
