APPROVED VENDOR Film Tape: 1/2 in Wd, 5 yd Lg, 6.5 mil Thick, Silicone
The APPROVED VENDOR Film Tape (SKU 15C659) is a PTFE Slick Surface Tape, 1/2 in wide, 5 yd long, 6.5 mil thick, made of silicone and polytetrafluoroethylene film (Series 204-5). 3G Electric sources this tape across…
SKU 3G-OTH-563928
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Film Tape (SKU 15C659) is a PTFE Slick Surface Tape, 1/2 in wide, 5 yd long, 6.5 mil thick, made of silicone and polytetrafluoroethylene film (Series 204-5). 3G Electric sources this tape across 14 industrial departments, with specialist expertise in combustion, pumps and controls ensuring accurate fulfillment.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is APPROVED VENDOR PTFE Slick Surface Tape used for?
This PTFE film tape provides a non-stick, heat-resistant surface for sealing, bundling, and release applications in industrial settings. It is commonly used on heat-sealing bars, chutes, and guide rails where low friction and high temperature resistance are required.
What are the specifications of APPROVED VENDOR Film Tape 15C659?
The tape is 1/2 in wide, 5 yd long, and 6.5 mil thick. It is made from silicone and polytetrafluoroethylene film, Series 204-5. The manufacturer part number is 15C659. These specs define its suitability for light-duty release and masking tasks.
Where to buy APPROVED VENDOR PTFE tape in worldwide?
3G Electric supplies this APPROVED VENDOR PTFE Slick Surface Tape to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote on SKU 15C659; we source across 14 industrial departments with specialist expertise in combustion, pumps and controls.
How to install APPROVED VENDOR PTFE film tape?
Clean the surface thoroughly to remove grease and debris. Apply the tape with even pressure, avoiding air bubbles. For best adhesion, use at temperatures above 10 °C. The silicone adhesive bonds well to smooth, dry surfaces. Trim excess with a sharp blade.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR ptfe slick surface tape. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









