APPROVED VENDOR Concrete Anchor Screw: 3 in Overall Lg, 1/4 in Dia, Steel, Zinc Yellow
The APPROVED VENDOR Concrete Anchor Screw (MPN 14300HS) is a 3-inch overall length, 1/4-inch diameter hex-head screw anchor made of steel with a zinc yellow finish. It features a pointed tip, is removable, and is…
SKU 3G-OTH-540291
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Concrete Anchor Screw (MPN 14300HS) is a 3-inch overall length, 1/4-inch diameter hex-head screw anchor made of steel with a zinc yellow finish. It features a pointed tip, is removable, and is supplied in a 100-pack. This inch-system concrete screw anchor is not graded by material class.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR 14300HS concrete anchor screw used for?
The APPROVED VENDOR 14300HS is a 1/4-inch diameter, 3-inch long hex-head concrete screw anchor used to fasten fixtures, brackets, and equipment to concrete, brick, or block. Its zinc yellow finish provides moderate corrosion resistance, and the pointed tip enables easy installation into pre-drilled holes.
What are the specifications of the APPROVED VENDOR 14300HS concrete anchor screw?
The APPROVED VENDOR 14300HS is a 3-inch overall length, 1/4-inch diameter hex-head concrete screw anchor made of steel with a zinc yellow finish. It has a pointed tip, is removable, and is supplied in a 100-pack. It is not graded by material class and uses inch-system measurement.
Where to buy APPROVED VENDOR 14300HS concrete anchor screws worldwide?
3G Electric supplies the APPROVED VENDOR 14300HS concrete anchor screw worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this 100-pack of 1/4-inch by 3-inch hex-head screw anchors.
How to install the APPROVED VENDOR 14300HS concrete anchor screw?
To install the APPROVED VENDOR 14300HS, drill a hole in concrete using a carbide bit sized to the anchor diameter (1/4 inch). Clean the hole of dust, then drive the screw anchor with a hex driver until the head is snug against the fixture. Do not overtighten. The anchor is removable if needed.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR hex-head screw anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









