APPROVED VENDOR Concrete Anchor Screw: 2 in Overall Lg, 1/4 in Dia, Steel, Zinc Yellow
The APPROVED VENDOR Concrete Anchor Screw (MPN 14200PS) is a 2-inch overall length, 1/4-inch diameter flat-head screw anchor made of steel with a zinc yellow finish. It features a pointed tip and is removable…
SKU 3G-OTH-540860
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Concrete Anchor Screw (MPN 14200PS) is a 2-inch overall length, 1/4-inch diameter flat-head screw anchor made of steel with a zinc yellow finish. It features a pointed tip and is removable, supplied in a 100-pack. This inch-system concrete screw anchor is not graded by material class.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR 14200PS concrete anchor screw used for?
This 1/4-inch diameter, 2-inch long flat-head screw anchor is used for fastening fixtures, brackets, or equipment into concrete, block, or brick. Its zinc yellow finish provides moderate corrosion resistance, and the pointed tip eases installation. It is removable, making it suitable for temporary or adjustable mounting in industrial and commercial settings.
What are the specifications of the APPROVED VENDOR 14200PS concrete anchor screw?
The APPROVED VENDOR 14200PS is a 2-inch overall length, 1/4-inch diameter concrete screw anchor with a steel, zinc yellow finish. It has a pointed tip, is removable, and is supplied in a 100-pack. It uses inch-system measurement and is not graded by material class. The anchor type is screw, and the screw anchor type is concrete screw anchor.
Where to buy APPROVED VENDOR concrete anchor screws worldwide?
3G Electric supplies the APPROVED VENDOR 14200PS concrete anchor screw worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this 100-pack of 1/4-inch diameter, 2-inch long zinc yellow steel screw anchors.
How to install a concrete screw anchor like the APPROVED VENDOR 14200PS?
Drill a pilot hole into the concrete using a carbide-tipped bit of the recommended diameter (typically 1/4 inch for this screw). Clean the hole of dust. Drive the screw anchor into the hole with a screwdriver or impact driver until the flat head is flush. The pointed tip helps start the thread. Ensure the anchor is removable if needed.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR flat-head screw anchors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









