Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 1" Mill Dia, 1" LOC - General Purpose Carbide Square End Mills
APPROVED VENDORGeneral Purpose Carbide Square End Mills

APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 1" Mill Dia, 1" LOC

The APPROVED VENDOR Square End Mill is a general purpose carbide square end mill, AlTiN coated, with 4 flutes, a 1" mill diameter, 1" LOC, and 4" OAL (MPN 206-001259B).

SKU 3G-OTH-272051

Merek
APPROVED VENDOR
Item
Square End Mill: Carbide, AlTiN Coated, 4 Flute, 1" Mill Dia, 1" LOC
Kategori
General Purpose Carbide Square End Mills
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyur
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Spesifikasi Teknis

APPROVED VENDOR
Manufacturer Part Number
206-001259B
Type
AlTiN Coated
Mill Dia
1"
OAL
4"
Flute
4
LOC
1"
Lihat Lembar Spesifikasi Lengkap

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

APPROVED VENDOR Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

The APPROVED VENDOR Square End Mill is a general purpose carbide square end mill, AlTiN coated, with 4 flutes, a 1" mill diameter, 1" LOC, and 4" OAL (MPN 206-001259B).

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

What is APPROVED VENDOR Square End Mill 206-001259B used for?

This carbide square end mill is used for general-purpose milling of metals and alloys. Its AlTiN coating provides heat and wear resistance for longer tool life. It is suitable for slotting, profiling, and contouring in industrial machining applications.

What are the specifications of APPROVED VENDOR Square End Mill 206-001259B?

This end mill has a 1-inch mill diameter, 1-inch length of cut (LOC), and 4-inch overall length (OAL). It features 4 flutes, a solid carbide body, and an AlTiN coating. The manufacturer part number is 206-001259B.

Where to buy APPROVED VENDOR Square End Mill 206-001259B worldwide?

You can source this APPROVED VENDOR square end mill through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.

How to select the right square end mill for milling operations?

Select based on material, coating, flute count, and dimensions. For general-purpose steel milling, a 4-flute AlTiN-coated carbide end mill like this APPROVED VENDOR model offers good chip evacuation and heat resistance. Match diameter and length of cut to your workpiece and machine rigidity.

Digunakan dalam

Aplikasi umum untuk APPROVED VENDOR
Laboratory sampling — APPROVED VENDOR clear wide mouth glass bottles for collecting and storing liquid samples in non-sterile environments.
Steam heating maintenance — APPROVED VENDOR forged brass radiator valves for regulating steam flow in commercial building heating systems.
High-pressure cleaning — APPROVED VENDOR turbo spray nozzles for pressure washers used in industrial equipment cleaning up to 6,000 psi.
Cleanroom operations — APPROVED VENDOR vinyl task chairs for seating in ISO 5 classified manufacturing or assembly areas.
General sealing — APPROVED VENDOR natural rubber stoppers for closing laboratory flasks or test tubes in educational or research settings.
Tamper-evident security — APPROVED VENDOR brass lead and wire seals for securing utility meters, cargo containers, or access panels.

APPROVED VENDOR Produk

3G Electric memasok APPROVED VENDOR general purpose carbide square end mills. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Produk serupa

Dicocokkan berdasarkan spesifikasi dan deskripsi
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 1" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 206-001264)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 1" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 206-001264)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 1-1/4" Mill Dia, 2" LOC, 4-1/2" OAL (MPN 206-001266B)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 1-1/4" Mill Dia, 2" LOC, 4-1/2" OAL (MPN 206-001266B)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 7/8" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 206-001254)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 7/8" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 206-001254)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 3/4" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 206-001244)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 3/4" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 206-001244)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 1/2" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 206-001203A)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 1/2" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 206-001203A)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 13/16" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 206-001246)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 13/16" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 206-001246)

Lainnya dari APPROVED VENDOR

Lihat semua APPROVED VENDOR suku cadang →
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 15/32" Mill Dia, 1" LOC, 3" OAL (MPN 204-001196)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 15/32" Mill Dia, 1" LOC, 3" OAL (MPN 204-001196)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 7/16" Mill Dia, 3" LOC, 6" OAL (MPN 216-001053)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 7/16" Mill Dia, 3" LOC, 6" OAL (MPN 216-001053)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 18 mm Mill Dia, 38 mm LOC (MPN 206-001452)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 18 mm Mill Dia, 38 mm LOC (MPN 206-001452)
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 2 Flute, 3/4" Mill Dia, 2-1/4" LOC, 5" OAL (MPN 213-001081)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 2 Flute, 3/4" Mill Dia, 2-1/4" LOC, 5" OAL (MPN 213-001081)
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 2 Flute, 7/16" Mill Dia, 3" LOC, 6" OAL (MPN 216-001051)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 2 Flute, 7/16" Mill Dia, 3" LOC, 6" OAL (MPN 216-001051)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 17/64" Mill Dia, 3/4" LOC (MPN 204-001139)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 17/64" Mill Dia, 3/4" LOC (MPN 204-001139)
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 18 mm Mill Dia, 38 mm LOC, 102 mm OAL (MPN 204-001450)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 18 mm Mill Dia, 38 mm LOC, 102 mm OAL (MPN 204-001450)
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 4 Flute, 1/16" Mill Dia, 1/8" LOC, 1-1/2" OAL (MPN 203-001021)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 4 Flute, 1/16" Mill Dia, 1/8" LOC, 1-1/2" OAL (MPN 203-001021)