Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 5/8" Mill Dia, 1-1/4" LOC - General Purpose Carbide Ball End Mills
APPROVED VENDORGeneral Purpose Carbide Ball End Mills

APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 5/8" Mill Dia, 1-1/4" LOC

The APPROVED VENDOR Ball End Mill is a general purpose carbide ball end mill with an AlTiN coating, 4 flutes, a 5/8" mill diameter, 1-1/4" length of cut, and 3-1/2" overall length (MPN 223-001135).

SKU 3G-OTH-248197

Merek
APPROVED VENDOR
Item
Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 5/8" Mill Dia, 1-1/4" LOC
Kategori
General Purpose Carbide Ball End Mills
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyur
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Spesifikasi Teknis

APPROVED VENDOR
Manufacturer Part Number
223-001135
Type
AlTiN Coated
Mill Dia
5/8"
OAL
3-1/2"
Flute
4
LOC
1-1/4"
Lihat Lembar Spesifikasi Lengkap

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

APPROVED VENDOR Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

The APPROVED VENDOR Ball End Mill is a general purpose carbide ball end mill with an AlTiN coating, 4 flutes, a 5/8" mill diameter, 1-1/4" length of cut, and 3-1/2" overall length (MPN 223-001135).

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

What is the APPROVED VENDOR ball end mill used for?

This carbide ball end mill is used for general-purpose contouring, profiling, and 3D machining of metals and composites. The AlTiN coating provides heat resistance for dry or wet cutting on steel, stainless steel, and cast iron. It is suitable for CNC milling in tool rooms and production shops.

What are the specifications of the APPROVED VENDOR ball end mill?

This ball end mill has a 5/8" mill diameter, 1-1/4" length of cut (LOC), and 3-1/2" overall length (OAL). It features 4 flutes, an AlTiN coating, and is made of carbide. The manufacturer part number is 223-001135. It is designed for general-purpose milling applications.

Where to buy the APPROVED VENDOR ball end mill worldwide?

3G Electric supplies the APPROVED VENDOR ball end mill worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time. We source and deliver this item to any country.

How to select the right ball end mill for your application?

Select based on material, coating, and geometry. For general-purpose steel milling, this AlTiN-coated 4-flute carbide ball end mill offers good wear resistance. Match the mill diameter to your required radius and the length of cut to your depth needs. Use appropriate speeds and feeds for carbide tools.

Digunakan dalam

Aplikasi umum untuk APPROVED VENDOR
Laboratory sampling — APPROVED VENDOR clear wide mouth glass bottles for collecting and storing liquid samples in non-sterile environments.
Steam heating maintenance — APPROVED VENDOR forged brass radiator valves for regulating steam flow in commercial building heating systems.
High-pressure cleaning — APPROVED VENDOR turbo spray nozzles for pressure washers used in industrial equipment cleaning up to 6,000 psi.
Cleanroom operations — APPROVED VENDOR vinyl task chairs for seating in ISO 5 classified manufacturing or assembly areas.
General sealing — APPROVED VENDOR natural rubber stoppers for closing laboratory flasks or test tubes in educational or research settings.
Tamper-evident security — APPROVED VENDOR brass lead and wire seals for securing utility meters, cargo containers, or access panels.

APPROVED VENDOR Produk

3G Electric memasok APPROVED VENDOR general purpose carbide ball end mills. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Produk serupa

Dicocokkan berdasarkan spesifikasi dan deskripsi
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 13/32" Mill Dia, 1" LOC, 2-3/4" OAL (MPN 223-001117)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 13/32" Mill Dia, 1" LOC, 2-3/4" OAL (MPN 223-001117)
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 7/16" Mill Dia, 1" LOC, 2-3/4" OAL (MPN 223-001118)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 7/16" Mill Dia, 1" LOC, 2-3/4" OAL (MPN 223-001118)
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 7/8" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 223-001165)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 7/8" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 223-001165)
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 9/16" Mill Dia, 1-1/4" LOC (MPN 223-001127)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 9/16" Mill Dia, 1-1/4" LOC (MPN 223-001127)
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 3/4" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 223-001154)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 3/4" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 223-001154)
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 15/32" Mill Dia, 1" LOC, 3" OAL (MPN 223-001119)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlTiN Coated, 4 Flute, 15/32" Mill Dia, 1" LOC, 3" OAL (MPN 223-001119)

Lainnya dari APPROVED VENDOR

Lihat semua APPROVED VENDOR suku cadang →
APPROVED VENDOR Ball End Mill: Carbide, TiCN Coated, 2 Flute, 3/4" Mill Dia, 2-1/4" LOC, 5" OAL (MPN 224-001082)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, TiCN Coated, 2 Flute, 3/4" Mill Dia, 2-1/4" LOC, 5" OAL (MPN 224-001082)
APPROVED VENDOR Ball End Mill: Carbide, TiN Coated, 4 Flute, 1/2" Mill Dia, 1" LOC, 3" OAL (MPN 223-001111)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, TiN Coated, 4 Flute, 1/2" Mill Dia, 1" LOC, 3" OAL (MPN 223-001111)
APPROVED VENDOR Ball End Mill: Carbide, TiN Coated, 4 Flute, 5/8" Mill Dia, 2-1/4" LOC, 5" OAL (MPN 226-001071)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, TiN Coated, 4 Flute, 5/8" Mill Dia, 2-1/4" LOC, 5" OAL (MPN 226-001071)
APPROVED VENDOR Ball End Mill: Carbide, 4 Flute, 3/4" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 223-001150)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 4 Flute, 3/4" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 223-001150)
APPROVED VENDOR Ball End Mill: Carbide, TiCN Coated, 2 Flute, 11 mm Mill Dia, 25 mm LOC, 76 mm OAL (MPN 221-001510C)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, TiCN Coated, 2 Flute, 11 mm Mill Dia, 25 mm LOC, 76 mm OAL (MPN 221-001510C)
APPROVED VENDOR Ball End Mill: Carbide, TiCN Coated, 2 Flute, 5/32" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 224-001007)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, TiCN Coated, 2 Flute, 5/32" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 224-001007)
APPROVED VENDOR Ball End Mill: Carbide, TiCN Coated, 4 Flute, 5/32" Mill Dia, 5/16" LOC, 2" OAL (MPN 220-001051)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, TiCN Coated, 4 Flute, 5/32" Mill Dia, 5/16" LOC, 2" OAL (MPN 220-001051)
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 20 mm Mill Dia, 38 mm LOC, 102 mm OAL (MPN 221-001600)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 20 mm Mill Dia, 38 mm LOC, 102 mm OAL (MPN 221-001600)