Grainger Metal Pipe Elbow: 90° Elbow, 3/4 in x 3/4 in, Brass, 200 psi
The APPROVED VENDOR Metal Pipe Elbow is a 90° low-pressure threaded pipe fitting in brass, sized 3/4 in x 3/4 in, with a maximum operating pressure of 200 psi (MPN 1VER9). 3G Electric interprets this demand and…
SKU 3G-OTH-461372
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Metal Pipe Elbow is a 90° low-pressure threaded pipe fitting in brass, sized 3/4 in x 3/4 in, with a maximum operating pressure of 200 psi (MPN 1VER9). 3G Electric interprets this demand and delivers genuine industrial fittings across 14 departments — and far more — with specialist trust anchored in combustion, pumps and controls.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR 1VER9 metal pipe elbow used for?
The APPROVED VENDOR 1VER9 is a 90° brass pipe elbow used to change flow direction in low-pressure threaded piping systems. It is suitable for water, air, and non-corrosive fluid lines in industrial, commercial, and HVAC applications up to 200 psi.
What are the specifications of the APPROVED VENDOR 1VER9 pipe elbow?
The APPROVED VENDOR 1VER9 is a 90° elbow with 3/4 in female NPT threads on both ends, made of brass, and rated for a maximum operating pressure of 200 psi. The manufacturer part number is 1VER9.
Where to buy the APPROVED VENDOR 1VER9 pipe elbow worldwide?
3G Electric supplies the APPROVED VENDOR 1VER9 brass pipe elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this genuine industrial fitting.
How to install the APPROVED VENDOR 1VER9 brass elbow?
Apply thread sealant or PTFE tape to the male pipe threads, then hand-tighten the APPROVED VENDOR 1VER9 elbow onto the fitting. Use a wrench on the hex flats for final snugging — avoid over-tightening to prevent cracking the brass. Always verify pressure rating compatibility.
Grainger Produk
3G Electric memasok Grainger low-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.