APPROVED VENDOR Metal Pipe Straight: Straight, 3/4 in x 3/4 in, Brass, 200 psi
The APPROVED VENDOR Metal Pipe Straight is a low-pressure threaded pipe fitting, specifically a 3/4 in x 3/4 in brass coupling rated for a maximum operating pressure of 200 psi (MPN 1VFE2).
SKU 3G-OTH-461427
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Metal Pipe Straight is a low-pressure threaded pipe fitting, specifically a 3/4 in x 3/4 in brass coupling rated for a maximum operating pressure of 200 psi (MPN 1VFE2).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR Metal Pipe Straight used for?
The APPROVED VENDOR Metal Pipe Straight is a low-pressure threaded pipe fitting used to connect two pipes of the same diameter in industrial plumbing, HVAC, and fluid-handling systems. Its brass construction resists corrosion, making it suitable for water, air, and non-aggressive media applications.
What are the specifications of the APPROVED VENDOR 1VFE2 pipe fitting?
The APPROVED VENDOR 1VFE2 is a 3/4 in x 3/4 in brass coupling with a maximum operating pressure of 200 psi. It is a straight, low-pressure threaded pipe fitting designed for reliable connections in industrial systems. Always verify compatibility with your media and temperature range.
Where to buy the APPROVED VENDOR 1VFE2 worldwide?
3G Electric supplies the APPROVED VENDOR 1VFE2 brass coupling to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact our team for a quote and lead time on this low-pressure threaded pipe fitting.
How to install the APPROVED VENDOR brass pipe coupling?
To install the APPROVED VENDOR brass coupling, clean and deburr pipe threads, apply a compatible thread sealant or PTFE tape, and hand-tighten the fitting. Use a wrench for final snugging—avoid overtightening to prevent cracking. Test the joint at system pressure before full operation.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR low-pressure threaded pipe fittings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









