APPROVED VENDOR Manual Two-Way Ball Valve: 1/4 in, Brass, Straight, MNPT x MNPT
The APPROVED VENDOR Manual Two-Way Ball Valve (SKU 1WML5) is a mini brass ball valve with a 1/4 in connection, featuring a straight body and MNPT x MNPT ends. It has a full port ball port and a lever handle…
SKU 3G-OTH-443721
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Manual Two-Way Ball Valve (SKU 1WML5) is a mini brass ball valve with a 1/4 in connection, featuring a straight body and MNPT x MNPT ends. It has a full port ball port and a lever handle, identified by manufacturer part number G-BVLM-25M.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR Manual Two-Way Ball Valve used for?
This mini brass ball valve is used for on/off flow control in low-pressure industrial piping systems. Common applications include water, air, and oil lines where a compact, full-port valve with 1/4 in MNPT connections is needed. The lever handle provides quick manual shutoff.
What are the specifications of the APPROVED VENDOR G-BVLM-25M ball valve?
The APPROVED VENDOR G-BVLM-25M is a manual two-way ball valve with a 1/4 in connection, brass body, straight pattern, and MNPT x MNPT ends. It features a full port ball port and a lever handle. The manufacturer part number is G-BVLM-25M, and the SKU is 1WML5.
Where to buy the APPROVED VENDOR G-BVLM-25M ball valve worldwide?
3G Electric supplies the APPROVED VENDOR G-BVLM-25M ball valve worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this valve to any country.
How to install the APPROVED VENDOR mini brass ball valve?
Install the valve with the flow arrow aligned to pipe direction. Apply thread sealant to the MNPT ends and tighten to standard torque. Use the lever handle to open or close the valve fully. Avoid overtightening to prevent damage to the brass body. Always depressurize the line before installation.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR mini brass ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















