APPROVED VENDOR Manual Two-Way Ball Valve: 1/2 in, Brass, Straight, FNPT x FNPT
The APPROVED VENDOR Manual Two-Way Ball Valve (MPN G-BVO-50) is a 1/2 in brass ball valve with a full port ball port and straight body configuration. It features FNPT x FNPT connections and an oval handle. This valve…
SKU 3G-OTH-432187
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Manual Two-Way Ball Valve (MPN G-BVO-50) is a 1/2 in brass ball valve with a full port ball port and straight body configuration. It features FNPT x FNPT connections and an oval handle. This valve is designed for manual two-way flow control in industrial piping systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR Manual Two-Way Ball Valve used for?
The APPROVED VENDOR Manual Two-Way Ball Valve is used for on/off flow control in industrial piping systems. Its 1/2 in brass body and full port ball port minimize pressure drop, making it suitable for water, oil, and gas applications in plant maintenance and process lines.
What are the specifications of the APPROVED VENDOR G-BVO-50 ball valve?
The APPROVED VENDOR G-BVO-50 is a 1/2 in brass manual two-way ball valve with a straight body, FNPT x FNPT connections, and a full port ball port. It features an oval handle and is designed for straightforward flow isolation in industrial settings.
Where to buy the APPROVED VENDOR G-BVO-50 ball valve worldwide?
3G Electric supplies the APPROVED VENDOR G-BVO-50 ball valve worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the APPROVED VENDOR manual ball valve?
To install the APPROVED VENDOR ball valve, ensure the pipe ends are clean and apply thread sealant to the FNPT connections. Hand-tighten the valve into the line, then use a wrench on the valve hex flats—not the body—to avoid damage. Open the oval handle fully before pressurizing the system.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR brass ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















