APPROVED VENDOR Manual Two-Way Ball Valve: 1/2 in, Brass, Straight, MNPT x FNPT
The APPROVED VENDOR Manual Two-Way Ball Valve (MPN G-MBB-50) is a 1/2-inch brass ball valve with a full port ball port and a straight body configuration. It features MNPT x FNPT connections and a lever handle for…
SKU 3G-OTH-432027
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Manual Two-Way Ball Valve (MPN G-MBB-50) is a 1/2-inch brass ball valve with a full port ball port and a straight body configuration. It features MNPT x FNPT connections and a lever handle for manual operation.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR Manual Two-Way Ball Valve used for?
The APPROVED VENDOR Manual Two-Way Ball Valve is used to start, stop, or redirect flow in industrial piping systems. Its 1/2-inch brass construction and full port design make it suitable for water, oil, and gas applications in plant maintenance, HVAC, and process control.
What are the specifications of the APPROVED VENDOR G-MBB-50 ball valve?
The APPROVED VENDOR G-MBB-50 is a 1/2-inch brass ball valve with a straight body, full port ball port, and MNPT x FNPT connections. It features a lever handle for manual operation. The manufacturer part number is G-MBB-50, and the SKU is 20K901.
Where to buy the APPROVED VENDOR G-MBB-50 ball valve worldwide?
3G Electric supplies the APPROVED VENDOR G-MBB-50 ball valve worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the APPROVED VENDOR manual ball valve?
To install the APPROVED VENDOR ball valve, ensure the pipe threads are clean and apply thread sealant to the MNPT end. Tighten the valve by hand, then use a wrench on the valve body hex—never on the handle. Open and close the lever fully to verify smooth operation.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR brass ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















