APPROVED VENDOR Sillcock Valve: Handwheel, Brass, Brass, Cast Iron
The APPROVED VENDOR Sillcock Valve with Handwheel is a standard-design brass sillcock featuring a brass body and a cast iron handwheel. It has a 1/2-inch NPT inlet connection and is identified by manufacturer part…
SKU 3G-OTH-445763
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Sillcock Valve with Handwheel is a standard-design brass sillcock featuring a brass body and a cast iron handwheel. It has a 1/2-inch NPT inlet connection and is identified by manufacturer part number 108-003NL.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR Sillcock Valve used for?
The APPROVED VENDOR Sillcock Valve is used for outdoor water supply control, typically on residential or commercial buildings. It connects to a 1/2-inch NPT pipe and allows manual water flow regulation via its cast iron handwheel, making it suitable for garden hoses and general exterior plumbing.
What are the specifications of the APPROVED VENDOR Sillcock Valve 108-003NL?
The APPROVED VENDOR Sillcock Valve 108-003NL has a brass body and cast iron handwheel, with a 1/2-inch NPT inlet connection. It features a standard design, brass finish, and is classified as a sillcock type valve. The manufacturer part number is 108-003NL.
Where to buy the APPROVED VENDOR Sillcock Valve worldwide?
3G Electric supplies the APPROVED VENDOR Sillcock Valve worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this valve for your project.
How to install the APPROVED VENDOR Sillcock Valve?
To install the APPROVED VENDOR Sillcock Valve, apply thread sealant to the 1/2-inch NPT inlet and hand-tighten into the female pipe thread. Use a wrench on the valve body hex, not the handwheel, to avoid damage. Ensure the valve is supported and test for leaks after installation.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR sillcocks. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















