APPROVED VENDOR Manual Two-Way Ball Valve: 2 in, Brass, Straight, Sweat x Sweat
The APPROVED VENDOR Manual Two-Way Ball Valve is a 2-inch brass ball valve with a full port ball port and a straight body configuration. It features sweat x sweat connections and a lever handle, identified by…
SKU 3G-OTH-438380
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Manual Two-Way Ball Valve is a 2-inch brass ball valve with a full port ball port and a straight body configuration. It features sweat x sweat connections and a lever handle, identified by manufacturer part number 107-848NL.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR 107-848NL ball valve used for?
The APPROVED VENDOR 107-848NL is a manual two-way brass ball valve used for on/off flow control in plumbing, HVAC, and industrial piping systems. Its 2-inch full port design minimizes pressure drop, and sweat x sweat connections allow permanent copper-tube installation. It suits water, oil, and gas applications up to the valve's rated pressure.
What are the specifications of the APPROVED VENDOR 107-848NL ball valve?
The APPROVED VENDOR 107-848NL is a 2-inch brass ball valve with a straight body, full port ball port, and sweat x sweat connections. It has a lever handle and is identified by MPN 107-848NL. The valve is designed for manual two-way flow control in residential and commercial systems.
Where to buy the APPROVED VENDOR 107-848NL ball valve worldwide?
3G Electric supplies the APPROVED VENDOR 107-848NL ball valve worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. We source and deliver this valve to any country.
How to install the APPROVED VENDOR 107-848NL sweat x sweat ball valve?
To install the APPROVED VENDOR 107-848NL, clean and flux the copper pipe ends, then solder the sweat connections using a torch. Ensure the valve is fully open during soldering to protect the ball seal. After cooling, close the valve and test for leaks. Follow local plumbing codes for safe installation.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR brass ball valves. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















