Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
APPROVED VENDOR Corner Radius End Mill: Carbide, GMX-35 Coated, 4 Flute, 5/16" Mill Dia - Fast-Cutting Carbide Corner-Radius End Mills for Stainless Steel & Super Alloys
APPROVED VENDORFast-Cutting Carbide Corner-Radius End Mills for Stainless Steel & Super Alloys

APPROVED VENDOR Corner Radius End Mill: Carbide, GMX-35 Coated, 4 Flute, 5/16" Mill Dia

APPROVED VENDOR Corner Radius End Mill adalah alat potong karbida berlapis GMX-35 yang dirancang khusus untuk pemotongan cepat pada baja tahan karat dan superalloy. Dengan diameter 5/16", panjang lokasi 1-1/2", dan 4…

SKU 3G-OTH-320677

Merek
APPROVED VENDOR
Item
Corner Radius End Mill: Carbide, GMX-35 Coated, 4 Flute, 5/16" Mill Dia
Kategori
Fast-Cutting Carbide Corner-Radius End Mills for Stainless Steel & Super Alloys
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyur
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Spesifikasi Teknis

APPROVED VENDOR
Manufacturer Part Number
GM516RXL4015
Type
GMX-35 Coated
Mill Dia
5/16"
Flute
4
LOC
1-1/2"
Lihat Lembar Spesifikasi Lengkap

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

APPROVED VENDOR Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

APPROVED VENDOR Corner Radius End Mill adalah alat potong karbida berlapis GMX-35 yang dirancang khusus untuk pemotongan cepat pada baja tahan karat dan superalloy. Dengan diameter 5/16", panjang lokasi 1-1/2", dan 4 flute, end mill ini memberikan hasil permukaan yang halus dan presisi tinggi. Cocok untuk aplikasi industri manufaktur dan permesinan di Indonesia.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Untuk apa APPROVED VENDOR Corner Radius End Mill digunakan?

End mill ini digunakan untuk pemotongan cepat pada baja tahan karat dan superalloy. Dengan lapisan GMX-35, diameter 5/16", dan 4 flute, alat ini ideal untuk pembuatan cetakan, komponen mesin, dan aplikasi permesinan presisi lainnya.

Apa spesifikasi APPROVED VENDOR Corner Radius End Mill?

Spesifikasi meliputi diameter 5/16", panjang lokasi 1-1/2", 4 flute, dan lapisan GMX-35. Nomor bagian pabrikan adalah GM516RXL4015. Alat ini terbuat dari karbida untuk ketahanan aus yang tinggi.

Di mana beli APPROVED VENDOR Corner Radius End Mill di Indonesia?

Anda dapat membeli produk ini melalui 3G Electric, distributor resmi yang memasok dan mengirimkan ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman tepat waktu ke lokasi industri Anda.

Bagaimana cara memilih APPROVED VENDOR Corner Radius End Mill yang tepat?

Pilih berdasarkan diameter yang sesuai dengan kebutuhan pemotongan Anda. Untuk baja tahan karat dan superalloy, gunakan end mill dengan lapisan GMX-35 dan 4 flute seperti model GM516RXL4015 berdiameter 5/16" untuk hasil optimal.

Digunakan dalam

Aplikasi umum untuk APPROVED VENDOR
Laboratory sampling — APPROVED VENDOR clear wide mouth glass bottles for collecting and storing liquid samples in non-sterile environments.
Steam heating maintenance — APPROVED VENDOR forged brass radiator valves for regulating steam flow in commercial building heating systems.
High-pressure cleaning — APPROVED VENDOR turbo spray nozzles for pressure washers used in industrial equipment cleaning up to 6,000 psi.
Cleanroom operations — APPROVED VENDOR vinyl task chairs for seating in ISO 5 classified manufacturing or assembly areas.
General sealing — APPROVED VENDOR natural rubber stoppers for closing laboratory flasks or test tubes in educational or research settings.
Tamper-evident security — APPROVED VENDOR brass lead and wire seals for securing utility meters, cargo containers, or access panels.

APPROVED VENDOR Produk

3G Electric memasok APPROVED VENDOR fast-cutting carbide corner-radius end mills for stainless steel & super alloys. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Produk serupa

Dicocokkan berdasarkan spesifikasi dan deskripsi
APPROVED VENDOR Corner Radius End Mill: Carbide, GMX-35 Coated, 4 Flute, 3/8" Mill Dia, 1-1/4" LOC (MPN GM38RL4015)
APPROVED VENDOR
APPROVED VENDOR Corner Radius End Mill: Carbide, GMX-35 Coated, 4 Flute, 3/8" Mill Dia, 1-1/4" LOC (MPN GM38RL4015)
APPROVED VENDOR Corner Radius End Mill: Carbide, GMX-35 Coated, 4 Flute, 1/2" Mill Dia, 1-1/4" LOC (MPN GM12R4030)
APPROVED VENDOR
APPROVED VENDOR Corner Radius End Mill: Carbide, GMX-35 Coated, 4 Flute, 1/2" Mill Dia, 1-1/4" LOC (MPN GM12R4030)
APPROVED VENDOR Roughing End Mill: Carbide, GMX-35 Coated, 4 Flute, Coarse Pitch, 3/4" Mill Dia (MPN GMHX34CS4)
APPROVED VENDOR
APPROVED VENDOR Roughing End Mill: Carbide, GMX-35 Coated, 4 Flute, Coarse Pitch, 3/4" Mill Dia (MPN GMHX34CS4)
APPROVED VENDOR Roughing End Mill: Carbide, GMX-35 Coated, 4 Flute, Coarse Pitch, 3/4" Mill Dia (MPN GMHX34C4)
APPROVED VENDOR
APPROVED VENDOR Roughing End Mill: Carbide, GMX-35 Coated, 4 Flute, Coarse Pitch, 3/4" Mill Dia (MPN GMHX34C4)
APPROVED VENDOR Roughing End Mill: Carbide, GMX-35 Coated, 4 Flute, Coarse Pitch, 5/8" Mill Dia (MPN GMHX58C4)
APPROVED VENDOR
APPROVED VENDOR Roughing End Mill: Carbide, GMX-35 Coated, 4 Flute, Coarse Pitch, 5/8" Mill Dia (MPN GMHX58C4)
APPROVED VENDOR Roughing End Mill: Carbide, GMX-35 Coated, 4 Flute, Coarse Pitch, 1/2" Mill Dia (MPN GMHX12CS4)
APPROVED VENDOR
APPROVED VENDOR Roughing End Mill: Carbide, GMX-35 Coated, 4 Flute, Coarse Pitch, 1/2" Mill Dia (MPN GMHX12CS4)

Lainnya dari APPROVED VENDOR

Lihat semua APPROVED VENDOR suku cadang →
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 5/8" Mill Dia, 1-5/8" LOC (MPN 311305)
APPROVED VENDOR
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 5/8" Mill Dia, 1-5/8" LOC (MPN 311305)
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 1" Mill Dia, 2-5/8" LOC (MPN 311337)
APPROVED VENDOR
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 1" Mill Dia, 2-5/8" LOC (MPN 311337)
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 3/8" Mill Dia, 7/8" LOC (MPN 311275)
APPROVED VENDOR
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 3/8" Mill Dia, 7/8" LOC (MPN 311275)
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 1/8" Mill Dia, 1/4" LOC (MPN 311228)
APPROVED VENDOR
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 1/8" Mill Dia, 1/4" LOC (MPN 311228)
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 1/4" Mill Dia, 1/2" LOC (MPN 311250)
APPROVED VENDOR
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 1/4" Mill Dia, 1/2" LOC (MPN 311250)
APPROVED VENDOR Corner Radius End Mill: Carbide, GMX-35 Coated, 5 Flute, 3/8" Mill Dia, 5/8" LOC (MPN GM38RS5015)
APPROVED VENDOR
APPROVED VENDOR Corner Radius End Mill: Carbide, GMX-35 Coated, 5 Flute, 3/8" Mill Dia, 5/8" LOC (MPN GM38RS5015)
APPROVED VENDOR Corner Radius End Mill: Carbide, GMX-35 Coated, 4 Flute, 1/2" Mill Dia, 2" LOC (MPN GM12RXL4030)
APPROVED VENDOR
APPROVED VENDOR Corner Radius End Mill: Carbide, GMX-35 Coated, 4 Flute, 1/2" Mill Dia, 2" LOC (MPN GM12RXL4030)
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 1/8" Mill Dia, 3/4" LOC (MPN 311235)
APPROVED VENDOR
APPROVED VENDOR Corner Radius End Mill: Carbide, AlCrN Coated, 4 Flute, 1/8" Mill Dia, 3/4" LOC (MPN 311235)