APPROVED VENDOR Standoff: Inch, Female x Female, Hex, Nylon, Not Graded, Plain, 1/4 in
APPROVED VENDOR Standoff: Inch, a plastic female x female hex standoff made of nylon, not graded, plain finish, with a 1/4 in size. This fully threaded standoff is supplied in a 10 PK (MPN 14HTSP018).
SKU 3G-OTH-531261
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
APPROVED VENDOR Standoff: Inch, a plastic female x female hex standoff made of nylon, not graded, plain finish, with a 1/4 in size. This fully threaded standoff is supplied in a 10 PK (MPN 14HTSP018).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is an APPROVED VENDOR 1/4 in nylon female x female standoff used for?
This nylon hex standoff creates a fixed spacing between two panels or components in electronic enclosures, control cabinets, and industrial assemblies. Its female x female threads allow secure mounting with screws on both ends, providing electrical insulation and vibration resistance in low-stress applications.
What are the specifications of the APPROVED VENDOR 14HTSP018 standoff?
The APPROVED VENDOR 14HTSP018 is a 1/4 in hex standoff, female x female, fully threaded, made from not-graded nylon with a plain finish. It comes in a 10-pack. This inch-size plastic standoff is suitable for non-critical spacing where electrical isolation is needed.
Where to buy APPROVED VENDOR standoffs in worldwide?
3G Electric supplies APPROVED VENDOR standoffs to customers worldwide. We handle full logistics, customs clearance, and delivery for this nylon 1/4 in female x female hex standoff (MPN 14HTSP018). Contact our team to place an order for your industrial or electronic assembly needs.
How to install a nylon female x female standoff?
Insert a screw through the top panel into one female end of the standoff, then secure the bottom panel with another screw into the opposite female thread. Tighten to hand-torque only—nylon can strip if over-tightened. Use a washer under the screw head to distribute load and prevent cracking.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR plastic female x female standoffs. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









