APPROVED VENDOR Angle Silcock: Handwheel, Brass, Chrome, Aluminum, 1/2 in Inlet Connection Size
The APPROVED VENDOR Angle Silcock is a standard-design sillcock with a chrome finish, featuring a brass body and an aluminum handwheel handle. It has a 1/2-inch NPT inlet connection and is identified by manufacturer…
SKU 3G-OTH-445771
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Angle Silcock is a standard-design sillcock with a chrome finish, featuring a brass body and an aluminum handwheel handle. It has a 1/2-inch NPT inlet connection and is identified by manufacturer part number 104-511NL.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is an APPROVED VENDOR Angle Silcock used for?
An APPROVED VENDOR Angle Silcock is used to control water flow from an outdoor faucet or hose bib. It is commonly installed on commercial or residential buildings for garden hose connections, irrigation systems, or general water supply shutoff. The chrome finish and brass body provide corrosion resistance for exterior use.
What are the specifications of the APPROVED VENDOR Angle Silcock 104-511NL?
The APPROVED VENDOR Angle Silcock model 104-511NL has a brass body, chrome finish, and an aluminum handwheel handle. It features a standard design with a 1/2-inch NPT inlet connection. The handle type is a handwheel, and the product type is sillcock. These specs are from the manufacturer's technical data.
Where to buy the APPROVED VENDOR Angle Silcock worldwide?
You can source the APPROVED VENDOR Angle Silcock through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time. We supply this sillcock as part of our extensive product range.
How to install an APPROVED VENDOR Angle Silcock?
To install an APPROVED VENDOR Angle Silcock, first shut off the water supply. Apply thread sealant to the 1/2-inch NPT inlet and hand-tighten the brass body into the pipe fitting. Use a wrench on the hex flats to snug the connection, avoiding overtightening. Attach a hose to the outlet. Test for leaks before regular use.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR sillcocks. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















