Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 20 mm Mill Dia - General Purpose Carbide Square End Mills
APPROVED VENDORGeneral Purpose Carbide Square End Mills

APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 20 mm Mill Dia

The APPROVED VENDOR Square End Mill is a general-purpose carbide square end mill, TiCN coated, with 2 flutes, a 20 mm mill diameter, and a 38 mm length of cut (MPN 204-001460C). 3G Electric interprets this demand and…

SKU 3G-OTH-271845

Merek
APPROVED VENDOR
Item
Square End Mill: Carbide, TiCN Coated, 2 Flute, 20 mm Mill Dia
Kategori
General Purpose Carbide Square End Mills
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyur
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Spesifikasi Teknis

APPROVED VENDOR
Manufacturer Part Number
204-001460C
Type
TiCN Coated
Mill Dia
20 mm
Flute
2
LOC
38 mm
Lihat Lembar Spesifikasi Lengkap

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

APPROVED VENDOR Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

The APPROVED VENDOR Square End Mill is a general-purpose carbide square end mill, TiCN coated, with 2 flutes, a 20 mm mill diameter, and a 38 mm length of cut (MPN 204-001460C). 3G Electric interprets this demand and delivers it across 14 industrial departments — with specialist depth in combustion, pumps and controls as an authorised distributor — ensuring you get the right answer, not just a catalog.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

What is the APPROVED VENDOR square end mill used for?

This carbide square end mill is used for general-purpose milling of metals, plastics, and composites. Its TiCN coating and 2-flute design suit slotting, profiling, and finishing operations in industrial machining, tool and die making, and maintenance shops.

What are the specifications of the APPROVED VENDOR square end mill?

The APPROVED VENDOR square end mill (MPN 204-001460C) is a carbide, TiCN-coated, 2-flute tool with a 20 mm mill diameter and 38 mm length of cut. It is designed for general-purpose milling and is available through 3G Electric.

Where to buy the APPROVED VENDOR square end mill worldwide?

3G Electric supplies the APPROVED VENDOR square end mill worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your facility. Contact us for availability and lead time.

How to select the right square end mill for milling?

Select a square end mill based on material, coating, flute count, and diameter. For general-purpose milling, a TiCN-coated carbide tool with 2 flutes and 20 mm diameter suits ferrous and non-ferrous metals. Match length of cut to your depth requirements.

Digunakan dalam

Aplikasi umum untuk APPROVED VENDOR
Laboratory sampling — APPROVED VENDOR clear wide mouth glass bottles for collecting and storing liquid samples in non-sterile environments.
Steam heating maintenance — APPROVED VENDOR forged brass radiator valves for regulating steam flow in commercial building heating systems.
High-pressure cleaning — APPROVED VENDOR turbo spray nozzles for pressure washers used in industrial equipment cleaning up to 6,000 psi.
Cleanroom operations — APPROVED VENDOR vinyl task chairs for seating in ISO 5 classified manufacturing or assembly areas.
General sealing — APPROVED VENDOR natural rubber stoppers for closing laboratory flasks or test tubes in educational or research settings.
Tamper-evident security — APPROVED VENDOR brass lead and wire seals for securing utility meters, cargo containers, or access panels.

APPROVED VENDOR Produk

3G Electric memasok APPROVED VENDOR general purpose carbide square end mills. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Produk serupa

Dicocokkan berdasarkan spesifikasi dan deskripsi
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 18 mm Mill Dia, 38 mm LOC (MPN 204-001450C)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 18 mm Mill Dia, 38 mm LOC (MPN 204-001450C)
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 16 mm Mill Dia, 38 mm LOC (MPN 204-001440C)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 16 mm Mill Dia, 38 mm LOC (MPN 204-001440C)
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 3 mm Mill Dia, 12 mm LOC, 39 mm OAL (MPN 204-001311C)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 3 mm Mill Dia, 12 mm LOC, 39 mm OAL (MPN 204-001311C)
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 3/64" Mill Dia, 1/8" LOC, 1-1/2" OAL (MPN 204-021010)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 3/64" Mill Dia, 1/8" LOC, 1-1/2" OAL (MPN 204-021010)
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 2 Flute, 18 mm Mill Dia, 38 mm LOC, 102 mm OAL (MPN 204-001450A)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 2 Flute, 18 mm Mill Dia, 38 mm LOC, 102 mm OAL (MPN 204-001450A)
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 9/64" Mill Dia, 9/16" LOC, 2" OAL (MPN 204-021070)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiCN Coated, 2 Flute, 9/64" Mill Dia, 9/16" LOC, 2" OAL (MPN 204-021070)

Lainnya dari APPROVED VENDOR

Lihat semua APPROVED VENDOR suku cadang →
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 15/32" Mill Dia, 1" LOC, 3" OAL (MPN 204-001196)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 15/32" Mill Dia, 1" LOC, 3" OAL (MPN 204-001196)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 7/16" Mill Dia, 3" LOC, 6" OAL (MPN 216-001053)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 7/16" Mill Dia, 3" LOC, 6" OAL (MPN 216-001053)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 18 mm Mill Dia, 38 mm LOC (MPN 206-001452)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 4 Flute, 18 mm Mill Dia, 38 mm LOC (MPN 206-001452)
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 2 Flute, 3/4" Mill Dia, 2-1/4" LOC, 5" OAL (MPN 213-001081)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 2 Flute, 3/4" Mill Dia, 2-1/4" LOC, 5" OAL (MPN 213-001081)
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 2 Flute, 7/16" Mill Dia, 3" LOC, 6" OAL (MPN 216-001051)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 2 Flute, 7/16" Mill Dia, 3" LOC, 6" OAL (MPN 216-001051)
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 17/64" Mill Dia, 3/4" LOC (MPN 204-001139)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, AlTiN Coated, 2 Flute, 17/64" Mill Dia, 3/4" LOC (MPN 204-001139)
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 18 mm Mill Dia, 38 mm LOC, 102 mm OAL (MPN 204-001450)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 18 mm Mill Dia, 38 mm LOC, 102 mm OAL (MPN 204-001450)
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 4 Flute, 1/16" Mill Dia, 1/8" LOC, 1-1/2" OAL (MPN 203-001021)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, TiN Coated, 4 Flute, 1/16" Mill Dia, 1/8" LOC, 1-1/2" OAL (MPN 203-001021)