APPROVED VENDOR Twist-On Wire Connectors: Red, Wire Sizes 22 AWG – 6 AWG, 600 V, 300
The APPROVED VENDOR Twist-On Wire Connectors (Red) are general purpose wire connectors rated for 600 V and wire sizes 22 AWG to 6 AWG. They accommodate a maximum wire combination of (5) 12 AWG and a minimum of (3) 16…
SKU 3G-OTH-18253
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Twist-On Wire Connectors (Red) are general purpose wire connectors rated for 600 V and wire sizes 22 AWG to 6 AWG. They accommodate a maximum wire combination of (5) 12 AWG and a minimum of (3) 16 AWG, supplied in a pack of 300 (MPN 5UYJ1).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What are APPROVED VENDOR twist-on wire connectors used for?
These red twist-on wire connectors are used for general-purpose electrical splicing and termination in industrial, commercial, and residential wiring. They handle wire sizes from 22 AWG to 6 AWG and are rated for 600 V, making them suitable for junction boxes, lighting fixtures, and control panels.
What are the specifications of APPROVED VENDOR 5UYJ1 wire connectors?
The APPROVED VENDOR 5UYJ1 twist-on wire connectors are red, rated for 600 V, and accept wire sizes 22 AWG to 6 AWG. Maximum wire combination is (5) 12 AWG; minimum is (3) 16 AWG. Supplied in a pack of 300. Brand: APPROVED VENDOR.
Where to buy APPROVED VENDOR 5UYJ1 wire connectors worldwide?
3G Electric supplies APPROVED VENDOR 5UYJ1 twist-on wire connectors worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this pack of 300 connectors.
How to install APPROVED VENDOR twist-on wire connectors?
Strip the wire insulation to the recommended length (typically 1/2 to 5/8 inch), align the stripped ends, and twist the connector clockwise until snug. Ensure no bare wire is exposed below the connector skirt. For solid and stranded wire combinations, pre-twist stranded wires lightly before applying the connector.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR general purpose wire connectors. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









