APPROVED VENDOR Repair Clamp: For 2 in Pipe, 12 in Overall Lg
The APPROVED VENDOR Partial-Gasket Repair Clamp (SKU 5WMR1) is a 304 stainless steel clamp for 2 in pipe, with a 12 in overall length, steel bolts, and a nitrile rubber gasket. It supports a maximum operating…
SKU 3G-OTH-485197
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Partial-Gasket Repair Clamp (SKU 5WMR1) is a 304 stainless steel clamp for 2 in pipe, with a 12 in overall length, steel bolts, and a nitrile rubber gasket. It supports a maximum operating pressure of 150 psi and a maximum vacuum pressure of 150.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR 330-0812 repair clamp used for?
The APPROVED VENDOR 330-0812 partial-gasket repair clamp is used to seal leaks in 2 in pipe without replacing the entire section. It is suitable for industrial piping systems handling moderate pressures up to 150 psi and vacuum conditions, common in water, air, and low-pressure steam lines.
What are the specifications of the APPROVED VENDOR 330-0812 repair clamp?
The APPROVED VENDOR 330-0812 repair clamp fits 2 in pipe, has a 12 in overall length, and is made of 304 stainless steel. It features steel bolts, a nitrile rubber gasket, a maximum operating pressure of 150 psi, and a maximum vacuum pressure of 150. The manufacturer part number is 330-0812.
Where to buy the APPROVED VENDOR 330-0812 repair clamp worldwide?
3G Electric supplies the APPROVED VENDOR 330-0812 repair clamp worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this 304 stainless steel clamp for 2 in pipe to your facility. Contact us for availability and lead time.
How to install the APPROVED VENDOR 330-0812 repair clamp?
To install the APPROVED VENDOR 330-0812 repair clamp, clean the pipe surface around the leak, position the clamp over the damaged area, and tighten the steel bolts evenly to compress the nitrile rubber gasket against the pipe. Do not exceed 150 psi operating pressure. Follow standard piping repair safety practices.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR partial-gasket repair clamps for tube & pipe. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









