APPROVED VENDOR Repair Clamp: For 5 in Pipe, 9 in Overall Lg
The APPROVED VENDOR Partial-Gasket Repair Clamp (SKU 5WMT2, MPN 330-129) is designed for 5-inch pipe with a 9-inch overall length. It features a 304 stainless steel body, steel bolts, and a nitrile rubber gasket…
SKU 3G-OTH-485226
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Partial-Gasket Repair Clamp (SKU 5WMT2, MPN 330-129) is designed for 5-inch pipe with a 9-inch overall length. It features a 304 stainless steel body, steel bolts, and a nitrile rubber gasket, rated for a maximum operating pressure of 150 psi and a maximum vacuum pressure of 150.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is an APPROVED VENDOR repair clamp used for?
The APPROVED VENDOR partial-gasket repair clamp is used to seal leaks in 5-inch pipe without replacing the entire section. It is suitable for industrial piping systems handling moderate pressures up to 150 psi and vacuum conditions, common in water, wastewater, and process lines.
What are the specifications of the APPROVED VENDOR 330-129 repair clamp?
The APPROVED VENDOR 330-129 repair clamp fits 5-inch pipe, has a 9-inch overall length, a 304 stainless steel body, steel bolts, and a nitrile rubber gasket. It is rated for a maximum operating pressure of 150 psi and a maximum vacuum pressure of 150.
Where to buy an APPROVED VENDOR repair clamp worldwide?
3G Electric supplies the APPROVED VENDOR 330-129 repair clamp to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this partial-gasket repair clamp for 5-inch pipe.
How to install an APPROVED VENDOR partial-gasket repair clamp?
To install the APPROVED VENDOR repair clamp, clean the pipe surface, position the clamp over the leak, and tighten the steel bolts evenly to compress the nitrile rubber gasket. Do not exceed 150 psi operating pressure. Follow standard pipe repair practices for best results.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR partial-gasket repair clamps for tube & pipe. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









