APPROVED VENDOR Manual Two-Way Ball Valve: 1/2 in, Brass, Straight, FNPT x FNPT
The APPROVED VENDOR Manual Two-Way Ball Valve (MPN 6GD08) is a 1/2-inch brass ball valve with a drain, featuring a full-port, straight configuration with FNPT x FNPT connections. It is equipped with a locking lever…
SKU 3G-OTH-432575
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Manual Two-Way Ball Valve (MPN 6GD08) is a 1/2-inch brass ball valve with a drain, featuring a full-port, straight configuration with FNPT x FNPT connections. It is equipped with a locking lever handle for secure operation.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR 6GD08 ball valve used for?
The APPROVED VENDOR 6GD08 is a manual two-way ball valve used to start, stop, and isolate flow in industrial piping systems. Its 1/2-inch brass body, full-port design, and FNPT x FNPT connections make it suitable for water, oil, and gas applications in plant maintenance and process lines.
What are the specifications of the APPROVED VENDOR 6GD08 ball valve?
The APPROVED VENDOR 6GD08 is a 1/2-inch brass ball valve with a straight, full-port configuration and FNPT x FNPT connections. It features a locking lever handle for secure operation and includes a drain port. The manufacturer part number is 6GD08.
Where to buy the APPROVED VENDOR 6GD08 ball valve worldwide?
3G Electric supplies the APPROVED VENDOR 6GD08 ball valve worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this brass ball valve with locking lever handle.
How to install the APPROVED VENDOR 6GD08 ball valve?
To install the APPROVED VENDOR 6GD08, ensure the pipe threads are clean and apply thread sealant to the FNPT connections. Tighten the valve using the wrench flats on the body, not the handle. After installation, operate the locking lever handle through full open and close positions to verify smooth function.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR brass ball valves with drain. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















