Grainger Pipe Nipple: 2 in Nominal Pipe Size, 2 in Lg, Schedule 40, Galvanized Steel
The APPROVED VENDOR Pipe Nipple (SKU 793F42) is a Schedule 40, galvanized steel, fully threaded, welded pipe nipple with a 2 in nominal pipe size and 2 in length. It features Male BSPT x Male BSPT connections and a…
SKU 3G-OTH-465624
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Pipe Nipple (SKU 793F42) is a Schedule 40, galvanized steel, fully threaded, welded pipe nipple with a 2 in nominal pipe size and 2 in length. It features Male BSPT x Male BSPT connections and a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR 793F42 pipe nipple used for?
The APPROVED VENDOR 793F42 is a Schedule 40 galvanized steel pipe nipple used for low-pressure fluid or gas connections in plumbing, HVAC, and industrial piping systems. Its fully threaded design and Male BSPT ends allow secure, leak-resistant joints in applications up to 125 psi @ 72°F.
What are the specifications of the APPROVED VENDOR 793F42 pipe nipple?
The APPROVED VENDOR 793F42 is a 2 in nominal pipe size, 2 in length, Schedule 40, galvanized steel, fully threaded, welded pipe nipple. It has Male BSPT x Male BSPT connections and a maximum operating pressure of 125 psi @ 72°F. It is globally sourced.
Where to buy the APPROVED VENDOR 793F42 pipe nipple worldwide?
3G Electric supplies the APPROVED VENDOR 793F42 pipe nipple worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this Schedule 40 galvanized steel nipple.
How to install a Schedule 40 galvanized steel pipe nipple?
Apply thread sealant or PTFE tape to the Male BSPT threads of the APPROVED VENDOR 793F42 nipple. Hand-tighten into the female fitting, then use wrenches on the nipple's hex section for final torque—avoid over-tightening to prevent thread damage. Ensure pressure does not exceed 125 psi @ 72°F.
Grainger Produk
3G Electric memasok Grainger schedule 40 fully threaded low pressure pipe nipples. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.