Grainger Carbon Steel Sheet: A1011, 0.135 in Thick, 12 in x 4 ft Nominal Size (WxL)
The APPROVED VENDOR Carbon Steel Sheet A1011 is a hot-rolled, mill-finished formable sheet with a thickness of 0.135 in and a nominal size of 12 in x 4 ft. Made from annealed carbon steel that is not heat treatable…
SKU 3G-OTH-590938
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Carbon Steel Sheet A1011 is a hot-rolled, mill-finished formable sheet with a thickness of 0.135 in and a nominal size of 12 in x 4 ft. Made from annealed carbon steel that is not heat treatable, it has a thickness tolerance of 0 in/-0.006 in and is supplied without certificates.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR A1011 carbon steel sheet used for?
This hot-rolled, mill-finished carbon steel sheet is used for general fabrication, forming, and structural applications where moderate strength and formability are required. It is commonly employed in manufacturing brackets, guards, enclosures, and non-critical components across industrial sectors.
What are the specifications of the APPROVED VENDOR A1011 carbon steel sheet?
The sheet is 0.135 in thick, 12 in x 4 ft nominal size, made from A1011 carbon steel, hot rolled and annealed. It is not heat treatable, with a thickness tolerance of 0 in/-0.006 in. Supplied without certificates, MPN SHT-A1011-0.134X12X48.
Where to buy the APPROVED VENDOR A1011 carbon steel sheet worldwide?
3G Electric supplies the APPROVED VENDOR A1011 carbon steel sheet to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this hot-rolled, mill-finished sheet.
How to select the right thickness for an A1011 carbon steel sheet?
Select thickness based on load requirements and forming needs. The 0.135 in sheet offers good formability for bending and punching. For heavier loads, consider thicker gauges; for lighter forming, thinner sheets may suffice. Always verify thickness tolerance, here 0 in/-0.006 in, to ensure fit.
Grainger Produk
3G Electric memasok Grainger formable a1011 carbon steel sheets & plates. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.