APPROVED VENDOR Key Locking Insert: Thin Wall, 2 Keys, M5x0.8 Int Thrd Sz, M8x1.25 Ext Thrd Sz
The APPROVED VENDOR Key Locking Insert is a thin-wall steel insert with M5x0.8 internal thread and M8x1.25 external thread, supplied in a 10-pack. It features 2 keys, a zinc phosphate finish, and is made from C1215…
SKU 3G-OTH-528471
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Key Locking Insert is a thin-wall steel insert with M5x0.8 internal thread and M8x1.25 external thread, supplied in a 10-pack. It features 2 keys, a zinc phosphate finish, and is made from C1215 steel. Compatible tap size is M8x1.25 with a 5-1/2 mm drill bit, and thread fits are 2A external and 2B internal.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is an APPROVED VENDOR key locking insert used for?
This thin-wall steel insert repairs or reinforces tapped holes in metal assemblies. Its M5x0.8 internal thread accepts a fastener while the M8x1.25 external thread locks into the parent material using two keys, preventing rotation under vibration.
What are the specifications of the APPROVED VENDOR key locking insert?
The insert has M5x0.8 internal and M8x1.25 external threads, a thin wall, two keys, and a zinc phosphate finish. It is made from C1215 steel, requires a 5-1/2 mm drill bit and M8x1.25 tap, with 2A external and 2B internal thread fits.
Where to buy APPROVED VENDOR key locking inserts worldwide?
3G Electric supplies and delivers APPROVED VENDOR key locking inserts worldwide. We handle full logistics and customs clearance so you receive genuine industrial parts like this 10-pack of thin-wall steel inserts with M5x0.8 internal threads.
How to install a thin-wall key locking insert?
Drill a 5-1/2 mm hole, tap it to M8x1.25, then thread the insert in using the two keys to lock it against rotation. Apply threadlocker for extra security. Always follow the manufacturer's torque and depth recommendations for the parent material.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR steel key-locking inserts. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
