APPROVED VENDOR Automotive Wire: TXL, 25 ft, 1 Conductor, 22 AWG, Light Blue
The APPROVED VENDOR Automotive Wire: TXL is an XLPE-insulated high flexibility primary wire, 25 ft in length with a single 22 AWG conductor in light blue, rated for 60 V. This wire is supplied by 3G Electric, a…
SKU 3G-OTH-45983
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Automotive Wire: TXL is an XLPE-insulated high flexibility primary wire, 25 ft in length with a single 22 AWG conductor in light blue, rated for 60 V. This wire is supplied by 3G Electric, a global industrial solutions provider that interprets customer demand and delivers genuine equipment across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is APPROVED VENDOR TXL automotive wire used for?
APPROVED VENDOR TXL wire is a thin-wall, XLPE-insulated primary wire for 12 V and 24 V automotive electrical systems. It is used in engine compartments, chassis wiring, and other high-temperature environments where flexibility and abrasion resistance are required.
What are the specifications of APPROVED VENDOR TXL wire 22 AWG?
This TXL wire is 25 ft long, 22 AWG, with 1 conductor, light blue insulation, and rated 60 V. The XLPE insulation provides high heat and chemical resistance. The manufacturer part number is WXP-6TXL-2201-L6-25.
Where to buy APPROVED VENDOR TXL wire 22 AWG worldwide?
3G Electric supplies APPROVED VENDOR TXL wire to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on part number WXP-6TXL-2201-L6-25.
How to select the correct TXL wire gauge for automotive use?
Select TXL wire gauge based on current load and circuit length. For low-current signals or sensors, 22 AWG is common. For higher loads, use 18 AWG or larger. Always check the manufacturer's ampacity chart and ensure voltage rating meets your system (e.g., 60 V for this wire).
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR xlpe-insulated high flexibility primary wires. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.















