Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 3/8" LOC - Carbide Square End Mills for Aluminum
APPROVED VENDORCarbide Square End Mills for Aluminum

APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 3/8" LOC

The APPROVED VENDOR Square End Mill is a carbide square end mill for aluminum, NF1 coated, with 2 flutes, a 1/8" mill diameter, 3/8" length of cut, and 1-1/2" overall length (MPN 312924).

SKU 3G-OTH-252284

Merek
APPROVED VENDOR
Item
Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 3/8" LOC
Kategori
Carbide Square End Mills for Aluminum
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyur
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Spesifikasi Teknis

APPROVED VENDOR
Manufacturer Part Number
312924
Type
NF1 Coated
Mill Dia
1/8"
OAL
1-1/2"
Flute
2
LOC
3/8"
Lihat Lembar Spesifikasi Lengkap

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

APPROVED VENDOR Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

The APPROVED VENDOR Square End Mill is a carbide square end mill for aluminum, NF1 coated, with 2 flutes, a 1/8" mill diameter, 3/8" length of cut, and 1-1/2" overall length (MPN 312924).

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

What is APPROVED VENDOR Square End Mill 312924 used for?

This carbide square end mill is designed for machining aluminum and non-ferrous materials. Its NF1 coating and 2-flute geometry provide efficient chip evacuation and a smooth finish in milling operations such as slotting, profiling, and contouring.

What are the specifications of the APPROVED VENDOR Square End Mill 312924?

The end mill has a 1/8" mill diameter, 3/8" length of cut (LOC), and 1-1/2" overall length (OAL). It is made of carbide with an NF1 coating, has 2 flutes, and is manufactured by APPROVED VENDOR under MPN 312924.

Where to buy APPROVED VENDOR Square End Mill 312924 worldwide?

3G Electric supplies the APPROVED VENDOR Square End Mill 312924 to customers worldwide. We handle full logistics, customs clearance, and delivery to your location. Contact us to source this end mill for your machining needs.

How to select the right square end mill for aluminum?

For aluminum, choose a carbide end mill with a polished or coated flute, like the NF1 coating on this APPROVED VENDOR model. A 2-flute design aids chip removal. Match the mill diameter and length of cut to your workpiece and machine capabilities for optimal results.

Digunakan dalam

Aplikasi umum untuk APPROVED VENDOR
Laboratory sampling — APPROVED VENDOR clear wide mouth glass bottles for collecting and storing liquid samples in non-sterile environments.
Steam heating maintenance — APPROVED VENDOR forged brass radiator valves for regulating steam flow in commercial building heating systems.
High-pressure cleaning — APPROVED VENDOR turbo spray nozzles for pressure washers used in industrial equipment cleaning up to 6,000 psi.
Cleanroom operations — APPROVED VENDOR vinyl task chairs for seating in ISO 5 classified manufacturing or assembly areas.
General sealing — APPROVED VENDOR natural rubber stoppers for closing laboratory flasks or test tubes in educational or research settings.
Tamper-evident security — APPROVED VENDOR brass lead and wire seals for securing utility meters, cargo containers, or access panels.

APPROVED VENDOR Produk

3G Electric memasok APPROVED VENDOR carbide square end mills for aluminum. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Produk serupa

Dicocokkan berdasarkan spesifikasi dan deskripsi
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 5/8" LOC, 2" OAL (MPN 312934)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 5/8" LOC, 2" OAL (MPN 312934)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 5/16" LOC, 1-1/2" OAL (MPN 312908)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 5/16" LOC, 1-1/2" OAL (MPN 312908)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 3/4" LOC, 2" OAL (MPN 312939)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 3/4" LOC, 2" OAL (MPN 312939)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 312944)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 312944)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 1/4" LOC, 1-1/2" OAL (MPN 312900)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 1/4" LOC, 1-1/2" OAL (MPN 312900)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 5/32" Mill Dia, 5/16" LOC, 2" OAL (MPN 312948)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 5/32" Mill Dia, 5/16" LOC, 2" OAL (MPN 312948)

Lainnya dari APPROVED VENDOR

Lihat semua APPROVED VENDOR suku cadang →
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 1" Mill Dia, 1-1/4" LOC, 7" OAL (MPN 315734)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 1" Mill Dia, 1-1/4" LOC, 7" OAL (MPN 315734)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/4" Mill Dia, 5/8" LOC, 2-1/2" OAL (MPN 313035)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/4" Mill Dia, 5/8" LOC, 2-1/2" OAL (MPN 313035)
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 3-1/2" OAL (MPN 314917)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 3-1/2" OAL (MPN 314917)
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 1/8" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 312942)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 1/8" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 312942)
APPROVED VENDOR Square End Mill: Carbide, ZrN Coated, 3 Flute, 3/8" Mill Dia, 2" LOC, 4" OAL (MPN 273-372000D)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, ZrN Coated, 3 Flute, 3/8" Mill Dia, 2" LOC, 4" OAL (MPN 273-372000D)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 312928)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 312928)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 3 Flute, 1/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 314466)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 3 Flute, 1/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 314466)
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 314843)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 314843)