Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 3/16" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 312988) - Carbide Square End Mills for Aluminum
APPROVED VENDORCarbide Square End Mills for Aluminum

APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 3/16" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 312988)

The APPROVED VENDOR Square End Mill (MPN 312988) is a carbide square end mill for aluminum, featuring 2 flutes, a 3/16" mill diameter, 3/4" length of cut, and 2-1/2" overall length. 3G Electric interprets customer…

SKU 3G-OTH-252097

Merek
APPROVED VENDOR
Item
Square End Mill: Carbide, 2 Flute, 3/16" Mill Dia, 3/4" LOC, 2-1/2" OAL
Kategori
Carbide Square End Mills for Aluminum
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyur
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Spesifikasi Teknis

APPROVED VENDOR
Manufacturer Part Number
312988
Mill Dia
3/16"
OAL
2-1/2"
Flute
2
LOC
3/4"
Lihat Lembar Spesifikasi Lengkap

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

APPROVED VENDOR Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

The APPROVED VENDOR Square End Mill (MPN 312988) is a carbide square end mill for aluminum, featuring 2 flutes, a 3/16" mill diameter, 3/4" length of cut, and 2-1/2" overall length. 3G Electric interprets customer demand and delivers this genuine industrial cutting tool across 14 departments — and far more — with specialist depth in combustion, pumps and controls as a trust anchor.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

What is APPROVED VENDOR Square End Mill 312988 used for?

This carbide square end mill is designed for aluminum machining. Its 2-flute geometry and 3/16" diameter enable efficient chip evacuation and smooth cutting in non-ferrous materials, making it suitable for milling slots, profiles, and pockets in aluminum workpieces.

What are the specifications of APPROVED VENDOR Square End Mill 312988?

The APPROVED VENDOR Square End Mill 312988 is a carbide, 2-flute tool with a 3/16" mill diameter, 3/4" length of cut (LOC), and 2-1/2" overall length (OAL). It is designed specifically for aluminum and non-ferrous materials.

Where to buy APPROVED VENDOR Square End Mill 312988 worldwide?

3G Electric supplies the APPROVED VENDOR Square End Mill 312988 worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.

How to select the right square end mill for aluminum?

For aluminum, choose a carbide end mill with 2 or 3 flutes for chip clearance. The 3/16" diameter and 3/4" LOC of the APPROVED VENDOR 312988 suit shallow slotting and profiling. Match flute count and coating to your machine speed and material hardness for optimal finish.

Digunakan dalam

Aplikasi umum untuk APPROVED VENDOR
Laboratory sampling — APPROVED VENDOR clear wide mouth glass bottles for collecting and storing liquid samples in non-sterile environments.
Steam heating maintenance — APPROVED VENDOR forged brass radiator valves for regulating steam flow in commercial building heating systems.
High-pressure cleaning — APPROVED VENDOR turbo spray nozzles for pressure washers used in industrial equipment cleaning up to 6,000 psi.
Cleanroom operations — APPROVED VENDOR vinyl task chairs for seating in ISO 5 classified manufacturing or assembly areas.
General sealing — APPROVED VENDOR natural rubber stoppers for closing laboratory flasks or test tubes in educational or research settings.
Tamper-evident security — APPROVED VENDOR brass lead and wire seals for securing utility meters, cargo containers, or access panels.

APPROVED VENDOR Produk

3G Electric memasok APPROVED VENDOR carbide square end mills for aluminum. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Produk serupa

Dicocokkan berdasarkan spesifikasi dan deskripsi
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 3/16" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 312993)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 3/16" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 312993)
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 7/32" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 313002)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 7/32" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 313002)
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 7/32" Mill Dia, 3/8" LOC, 2-1/2" OAL (MPN 312997)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 7/32" Mill Dia, 3/8" LOC, 2-1/2" OAL (MPN 312997)
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 1/8" Mill Dia, 3/4" LOC, 2" OAL (MPN 312937)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 1/8" Mill Dia, 3/4" LOC, 2" OAL (MPN 312937)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 3/16" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 312990)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 3/16" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 312990)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 3/16" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 312995)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 3/16" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 312995)

Lainnya dari APPROVED VENDOR

Lihat semua APPROVED VENDOR suku cadang →
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 1" Mill Dia, 1-1/4" LOC, 7" OAL (MPN 315734)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 1" Mill Dia, 1-1/4" LOC, 7" OAL (MPN 315734)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/4" Mill Dia, 5/8" LOC, 2-1/2" OAL (MPN 313035)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/4" Mill Dia, 5/8" LOC, 2-1/2" OAL (MPN 313035)
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 3-1/2" OAL (MPN 314917)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 5/8" Mill Dia, 1-5/8" LOC, 3-1/2" OAL (MPN 314917)
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 1/8" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 312942)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 2 Flute, 1/8" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 312942)
APPROVED VENDOR Square End Mill: Carbide, ZrN Coated, 3 Flute, 3/8" Mill Dia, 2" LOC, 4" OAL (MPN 273-372000D)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, ZrN Coated, 3 Flute, 3/8" Mill Dia, 2" LOC, 4" OAL (MPN 273-372000D)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 312928)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 2 Flute, 1/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 312928)
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 3 Flute, 1/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 314466)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, NF1 Coated, 3 Flute, 1/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 314466)
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 314843)
APPROVED VENDOR
APPROVED VENDOR Square End Mill: Carbide, 3 Flute, 1/2" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 314843)