Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 3/8" Mill Dia, 1/2" LOC, 2-1/2" OAL (MPN 313621) - Carbide Ball End Mills for Aluminum
APPROVED VENDORCarbide Ball End Mills for Aluminum

APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 3/8" Mill Dia, 1/2" LOC, 2-1/2" OAL (MPN 313621)

The APPROVED VENDOR Ball End Mill is a carbide ball end mill designed for aluminum, featuring 2 flutes, a 3/8" mill diameter, a 1/2" length of cut, and a 2-1/2" overall length (MPN 313621).

SKU 3G-OTH-210086

Merek
APPROVED VENDOR
Item
Ball End Mill: Carbide, 2 Flute, 3/8" Mill Dia, 1/2" LOC, 2-1/2" OAL
Kategori
Carbide Ball End Mills for Aluminum
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyur
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Spesifikasi Teknis

APPROVED VENDOR
Manufacturer Part Number
313621
Mill Dia
3/8"
OAL
2-1/2"
Flute
2
LOC
1/2"
Lihat Lembar Spesifikasi Lengkap

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

APPROVED VENDOR Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

The APPROVED VENDOR Ball End Mill is a carbide ball end mill designed for aluminum, featuring 2 flutes, a 3/8" mill diameter, a 1/2" length of cut, and a 2-1/2" overall length (MPN 313621).

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

What is a carbide ball end mill used for?

A carbide ball end mill is used for 3D contouring, profiling, and slotting in aluminum and non-ferrous materials. The ball nose creates smooth curved surfaces and fillets. This 2-flute design from APPROVED VENDOR provides efficient chip evacuation in aluminum machining.

What are the specifications of the APPROVED VENDOR ball end mill 313621?

This carbide ball end mill has a 3/8" mill diameter, 1/2" length of cut (LOC), and 2-1/2" overall length (OAL). It features 2 flutes and is designed for aluminum. The manufacturer part number is 313621.

Where to buy APPROVED VENDOR ball end mill 313621 worldwide?

3G Electric supplies the APPROVED VENDOR ball end mill 313621 to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact us to order this carbide 2-flute ball end mill for aluminum.

How to select a ball end mill for aluminum?

For aluminum, choose a carbide ball end mill with 2 or 3 flutes for good chip clearance. Match the mill diameter to your required radius and the length of cut to your depth. This APPROVED VENDOR 3/8" diameter, 1/2" LOC tool is suitable for general aluminum profiling.

Digunakan dalam

Aplikasi umum untuk APPROVED VENDOR
Laboratory sampling — APPROVED VENDOR clear wide mouth glass bottles for collecting and storing liquid samples in non-sterile environments.
Steam heating maintenance — APPROVED VENDOR forged brass radiator valves for regulating steam flow in commercial building heating systems.
High-pressure cleaning — APPROVED VENDOR turbo spray nozzles for pressure washers used in industrial equipment cleaning up to 6,000 psi.
Cleanroom operations — APPROVED VENDOR vinyl task chairs for seating in ISO 5 classified manufacturing or assembly areas.
General sealing — APPROVED VENDOR natural rubber stoppers for closing laboratory flasks or test tubes in educational or research settings.
Tamper-evident security — APPROVED VENDOR brass lead and wire seals for securing utility meters, cargo containers, or access panels.

APPROVED VENDOR Produk

3G Electric memasok APPROVED VENDOR carbide ball end mills for aluminum. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Produk serupa

Dicocokkan berdasarkan spesifikasi dan deskripsi
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 5/16" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 313615)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 5/16" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 313615)
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 3/8" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 313628)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 3/8" Mill Dia, 1" LOC, 2-1/2" OAL (MPN 313628)
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 7/16" Mill Dia, 2" LOC, 4" OAL (MPN 313652)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 7/16" Mill Dia, 2" LOC, 4" OAL (MPN 313652)
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 3/8" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 313632)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 3/8" Mill Dia, 1-1/2" LOC, 4" OAL (MPN 313632)
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 1/4" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 313592)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 1/4" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 313592)
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 1/4" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 313598)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 1/4" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 313598)

Lainnya dari APPROVED VENDOR

Lihat semua APPROVED VENDOR suku cadang →
APPROVED VENDOR Ball End Mill: Carbide, ZrN Coated, 2 Flute, 1/4" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 313602)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, ZrN Coated, 2 Flute, 1/4" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 313602)
APPROVED VENDOR Ball End Mill: Carbide, ZrN Coated, 2 Flute, 5/8" Mill Dia, 1-5/8" LOC, 3-1/2" OAL (MPN 282-621635D)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, ZrN Coated, 2 Flute, 5/8" Mill Dia, 1-5/8" LOC, 3-1/2" OAL (MPN 282-621635D)
APPROVED VENDOR Ball End Mill: Carbide, ZrN Coated, 2 Flute, 1/2" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 313668)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, ZrN Coated, 2 Flute, 1/2" Mill Dia, 1-1/4" LOC, 3" OAL (MPN 313668)
APPROVED VENDOR Ball End Mill: Carbide, ZrN Coated, 3 Flute, 1" Mill Dia, 3-1/2" LOC, 6" OAL (MPN 315352)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, ZrN Coated, 3 Flute, 1" Mill Dia, 3-1/2" LOC, 6" OAL (MPN 315352)
APPROVED VENDOR Ball End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 7/16" LOC, 2-1/2" OAL (MPN 315240)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 3 Flute, 5/16" Mill Dia, 7/16" LOC, 2-1/2" OAL (MPN 315240)
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 5/8" Mill Dia, 2-1/2" LOC, 5" OAL (MPN 313691)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 2 Flute, 5/8" Mill Dia, 2-1/2" LOC, 5" OAL (MPN 313691)
APPROVED VENDOR Ball End Mill: Carbide, 3 Flute, 5/32" Mill Dia, 5/8" LOC, 2" OAL (MPN 283-156635)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, 3 Flute, 5/32" Mill Dia, 5/8" LOC, 2" OAL (MPN 283-156635)
APPROVED VENDOR Ball End Mill: Carbide, ZrN Coated, 3 Flute, 1" Mill Dia, 2" LOC, 5" OAL (MPN 315346)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, ZrN Coated, 3 Flute, 1" Mill Dia, 2" LOC, 5" OAL (MPN 315346)