APPROVED VENDOR Sealing Washer: FDA Approved, Neoprene, White, 10.5 mm Inside Dia, 20 mm Outside Dia
The APPROVED VENDOR Sealing Washer (MPN ZSW-22) is a hygienic single-piece sealing washer made of white neoprene rubber, with a 10.5 mm inside diameter and 20 mm outside diameter for M10 screw size. It is FDA…
SKU 3G-OTH-533243
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Sealing Washer (MPN ZSW-22) is a hygienic single-piece sealing washer made of white neoprene rubber, with a 10.5 mm inside diameter and 20 mm outside diameter for M10 screw size. It is FDA approved, not metal detectable, not X-ray detectable, and designed for use without a nut.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR ZSW-22 sealing washer used for?
The APPROVED VENDOR ZSW-22 is a hygienic single-piece sealing washer used in food processing, pharmaceutical, and sanitary applications where FDA-approved materials are required. It seals M10 screw connections without a nut, preventing contamination in washdown environments.
What are the specifications of the APPROVED VENDOR ZSW-22 sealing washer?
The ZSW-22 sealing washer has a 10.5 mm inside diameter and 20 mm outside diameter, made of white neoprene rubber. It is FDA approved, not metal detectable, not X-ray detectable, and designed for use without a nut with M10 screws.
Where to buy the APPROVED VENDOR ZSW-22 sealing washer worldwide?
3G Electric supplies the APPROVED VENDOR ZSW-22 sealing washer worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this FDA-approved neoprene washer to your facility, regardless of location.
How to install the APPROVED VENDOR ZSW-22 sealing washer?
Install the ZSW-22 sealing washer by placing it directly onto an M10 screw shaft before assembly. The ID-bonded design allows it to seal without a nut. Ensure the mating surface is clean and dry. Tighten to standard torque for neoprene washers to avoid over-compression.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR hygienic single-piece sealing washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









