APPROVED VENDOR Sealing Washer: FDA Approved, EPDM, White, 0.195 in Inside Dia, 9/16 in Outside Dia
The APPROVED VENDOR Sealing Washer (MPN ZSW-40) is a hygienic single-piece sealing washer with FDA approval, made from white EPDM. It has a #12 screw size, 0.195 in inside diameter, and 9/16 in outside diameter. This…
SKU 3G-OTH-533199
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Sealing Washer (MPN ZSW-40) is a hygienic single-piece sealing washer with FDA approval, made from white EPDM. It has a #12 screw size, 0.195 in inside diameter, and 9/16 in outside diameter. This ID-bonded washer is designed for use without a nut and is not metal or X-ray detectable.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR ZSW-40 sealing washer used for?
The APPROVED VENDOR ZSW-40 is a hygienic single-piece sealing washer used in food, beverage, and pharmaceutical applications where FDA-approved EPDM seals are required. It provides a sanitary seal for #12 screw sizes without needing a nut, and is not metal or X-ray detectable.
What are the specifications of the APPROVED VENDOR ZSW-40 sealing washer?
The ZSW-40 has a #12 screw size, 0.195 in inside diameter, and 9/16 in outside diameter. It is made from white EPDM, is FDA approved, and is not metal or X-ray detectable. This ID-bonded washer is designed for use without a nut and is measured in inches.
Where to buy the APPROVED VENDOR ZSW-40 sealing washer worldwide?
3G Electric supplies the APPROVED VENDOR ZSW-40 sealing washer worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for availability and lead time on this FDA-approved EPDM washer.
How to install the APPROVED VENDOR ZSW-40 sealing washer?
Install the ZSW-40 by placing it over the screw shank before assembly. Since it is ID-bonded and designed for use without a nut, ensure the washer seats flush against the mating surface. Tighten to standard torque for #12 screws, avoiding over-compression of the EPDM seal.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR hygienic single-piece sealing washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









