APPROVED VENDOR Sealing Washer: FDA Approved, EPDM, White, 0.355 in Inside Dia, 5/8 in Outside Dia
The APPROVED VENDOR Sealing Washer (MPN ZSW-45) is a hygienic single-piece EPDM sealing washer with FDA approval. It has a 3/8 in screw size, 0.355 in inside diameter, and 5/8 in outside diameter, designed for use…
SKU 3G-OTH-533208
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Sealing Washer (MPN ZSW-45) is a hygienic single-piece EPDM sealing washer with FDA approval. It has a 3/8 in screw size, 0.355 in inside diameter, and 5/8 in outside diameter, designed for use without a nut. This white, inch-system washer is not metal detectable and not X-ray detectable.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR ZSW-45 sealing washer used for?
The APPROVED VENDOR ZSW-45 is a hygienic single-piece EPDM sealing washer used in food, beverage, and pharmaceutical applications where FDA-approved materials are required. It seals around a 3/8 in screw without a nut, preventing leaks in sanitary processing equipment.
What are the specifications of the APPROVED VENDOR ZSW-45 sealing washer?
The ZSW-45 has a 3/8 in screw size, 0.355 in inside diameter, and 5/8 in outside diameter. It is made of white EPDM, is FDA approved, not metal detectable, and not X-ray detectable. It is designed for use without a nut in inch-system applications.
Where to buy the APPROVED VENDOR ZSW-45 sealing washer worldwide?
3G Electric supplies the APPROVED VENDOR ZSW-45 sealing washer worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to order this FDA-approved EPDM washer for hygienic sealing applications.
How to install the APPROVED VENDOR ZSW-45 sealing washer?
Install the ZSW-45 by placing it over a 3/8 in screw without a nut. Ensure the mating surfaces are clean and dry. Tighten the screw to the manufacturer's recommended torque for EPDM washers to create a leak-proof seal. Avoid over-tightening to prevent deformation.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR hygienic single-piece sealing washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.









