APPROVED VENDOR Bonded Sealing Washer: Neoprene, Black/Brown, 0.75 in Inside Dia, 2 in Outside Dia
The APPROVED VENDOR Bonded Sealing Washer is a single-piece sealing washer with a neoprene seal material in black/brown, designed for use with a nut. It has an inside diameter of 0.75 in and an outside diameter of 2…
SKU 3G-OTH-534569
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Bonded Sealing Washer is a single-piece sealing washer with a neoprene seal material in black/brown, designed for use with a nut. It has an inside diameter of 0.75 in and an outside diameter of 2 in, measured in inches. This washer is not FDA approved, not metal detectable, and not X-ray detectable.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is an APPROVED VENDOR bonded sealing washer used for?
This bonded sealing washer is used with a nut to create a leak-proof seal in industrial fluid and air systems. The neoprene seal material provides vibration dampening and resists oil, water, and mild chemicals, making it suitable for plumbing, pneumatic, and hydraulic connections.
What are the specifications of the APPROVED VENDOR ZSW-78 sealing washer?
The ZSW-78 has a 0.75 in inside diameter and a 2 in outside diameter. It is a single-piece neoprene sealing washer in black/brown, designed for use with a nut. It is not FDA approved, not metal detectable, and not X-ray detectable.
Where to buy APPROVED VENDOR bonded sealing washers worldwide?
3G Electric supplies the APPROVED VENDOR ZSW-78 bonded sealing washer to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this neoprene sealing washer.
How to install an APPROVED VENDOR bonded sealing washer?
Place the washer between the nut and the mating surface with the neoprene side facing the sealing area. Tighten the nut to the manufacturer's recommended torque to compress the neoprene and form a leak-proof seal. Avoid over-tightening to prevent extrusion of the seal material.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR single-piece sealing washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.







