APPROVED VENDOR Flat Washer: #4 Screw Sz, Fiber Seal, 0.125 in Inside Dia, 1/4 in Outside Dia
The APPROVED VENDOR Flat Washer (SKU 894EJ6, MPN Z8602) is a single-piece fiber sealing washer for #4 screw sizes, supplied in a 25-pack. It has a 0.125 in inside diameter and a 1/4 in outside diameter, with a red…
SKU 3G-OTH-534489
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Flat Washer (SKU 894EJ6, MPN Z8602) is a single-piece fiber sealing washer for #4 screw sizes, supplied in a 25-pack. It has a 0.125 in inside diameter and a 1/4 in outside diameter, with a red fiber seal that is not FDA approved and not metal detectable. This inch-system washer is designed for general sealing applications where fiber material is specified.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR Z8602 flat washer used for?
The APPROVED VENDOR Z8602 flat washer is a single-piece fiber sealing washer for #4 screw sizes. It provides a general-purpose seal in inch-system applications where fiber material is specified, such as light-duty plumbing or mechanical assemblies requiring a non-metallic, non-FDA-rated gasket.
What are the specifications of the APPROVED VENDOR Z8602 flat washer?
The APPROVED VENDOR Z8602 flat washer has a 0.125 in inside diameter and a 1/4 in outside diameter. It is made of red fiber, is not FDA approved, and is not metal detectable. It comes in a 25-pack and is designed for #4 screw sizes in inch-system applications.
Where to buy the APPROVED VENDOR Z8602 flat washer worldwide?
3G Electric supplies the APPROVED VENDOR Z8602 flat washer worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this fiber sealing washer to your facility. Contact us for availability and lead time on your order.
How to install the APPROVED VENDOR Z8602 fiber sealing washer?
To install the APPROVED VENDOR Z8602 fiber sealing washer, place it over a #4 screw before tightening. Ensure the mating surfaces are clean and dry. Tighten to the torque specified for your application, as fiber washers compress slightly to form a seal. Avoid over-tightening to prevent damage.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR single-piece sealing washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.





