APPROVED VENDOR Flat Washer: 3/8 in Screw Sz, Fiber Seal, 0.379 in Inside Dia, 9/16 in Outside Dia
The APPROVED VENDOR Flat Washer (MPN Z8613) is a single-piece fiber sealing washer for 3/8-inch screw sizes, supplied in a 10-pack. It features a 0.379-inch inside diameter and a 9/16-inch outside diameter, with a…
SKU 3G-OTH-534495
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The APPROVED VENDOR Flat Washer (MPN Z8613) is a single-piece fiber sealing washer for 3/8-inch screw sizes, supplied in a 10-pack. It features a 0.379-inch inside diameter and a 9/16-inch outside diameter, with a red fiber seal material. This inch-system washer is not FDA approved and not metal detectable.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the APPROVED VENDOR Z8613 flat washer used for?
The APPROVED VENDOR Z8613 flat washer is a single-piece fiber sealing washer used to create a leak-resistant seal under screw heads in plumbing, pneumatic, and general industrial applications. Its red fiber material compresses to fill gaps, preventing fluid or gas leakage around 3/8-inch fasteners.
What are the specifications of the APPROVED VENDOR Z8613 flat washer?
The APPROVED VENDOR Z8613 flat washer has a 0.379-inch inside diameter and a 9/16-inch outside diameter, designed for 3/8-inch screw sizes. It is made of red fiber, is not FDA approved, and is not metal detectable. Supplied in a 10-pack, it uses inch-system measurements.
Where to buy the APPROVED VENDOR Z8613 flat washer worldwide?
3G Electric supplies the APPROVED VENDOR Z8613 flat washer worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to source this fiber sealing washer for your maintenance or production needs.
How to install the APPROVED VENDOR Z8613 fiber sealing washer?
To install the APPROVED VENDOR Z8613 fiber sealing washer, place it over the 3/8-inch screw shank before threading into the mating surface. Tighten the fastener evenly to compress the red fiber material, which forms a seal. Avoid over-torquing, as fiber washers can crush if excessive force is applied.
Digunakan dalam
Aplikasi umum untuk APPROVED VENDORAPPROVED VENDOR Produk
3G Electric memasok APPROVED VENDOR single-piece sealing washers. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.






